Bryant's 2000 R6 - Page 12 - Yamaha R6 Forum: YZF-R6 Forums
Reply
 
LinkBack Thread Tools Display Modes
post #111 of 132 (permalink) Old 12-08-2012, 06:21 PM Thread Starter
Go Fast or Go Home
 
Join Date: Jun 2012
Location: Waterloo, IA
Posts: 512
Bike: 2000 Yamaha R6
Re: Bryant's 2000 R6

yea id prolly just use them as running lights prolly. maybe it would look cool with red LED bulb on your bike and blue on mine

2000 Yamaha R6 17,xxx miles. Carbon fiber pieces. DanMoto Carbon GT exhaust. 6k HIDS. Integrated tail.
BBudensiek is offline  
Sponsored Links
Advertisement
 
post #112 of 132 (permalink) Old 12-09-2012, 04:13 AM
I eat my R6
 
bgballin26's Avatar
 
Join Date: Dec 2011
Location: Stillwater, Ok
Posts: 229
Bike: 1999 R6
Re: Bryant's 2000 R6

If i could get my flush mounts to actually work as flashers i would, but when i hook them up they don't flash, and the flashers on the intrument panel won't flash either, i can't figure out what the problem is. If i hook 1 side up, and leave the other side hooked up to the stock flasher, the led flush mount will flash. Maybe i should try different flashers, i was told the CustomLed flasher relay would fix the problem but it didn't.

99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
bgballin26 is offline  
post #113 of 132 (permalink) Old 12-09-2012, 06:34 AM
Yeah Science!
 
wutsup's Avatar
 
Join Date: Sep 2009
Location: Virginia
Posts: 7,319
Bike: gixxer chrome edition
Re: Bryant's 2000 R6

^Why is your sig so big?..

Chris
08 Track R6
Quote:
Originally Posted by RC51 View Post
Then you need worse brakes, not better ones. I suggest adding some air to your lines and spraying your pads with wd-40 before you go out. You'll find all kinds of corner speed.
wutsup is offline  
post #114 of 132 (permalink) Old 12-09-2012, 07:08 AM Thread Starter
Go Fast or Go Home
 
Join Date: Jun 2012
Location: Waterloo, IA
Posts: 512
Bike: 2000 Yamaha R6
Re: Bryant's 2000 R6

have you tried the load equalizer bg? Either this

http://www.customled.com/products/lo..._equalizer.htm

or i got this... so my greggs flush mounts work as runnig lights and blink when i turn the flasher on...

http://www.customled.com/products/ma...ic_blinker.htm

2000 Yamaha R6 17,xxx miles. Carbon fiber pieces. DanMoto Carbon GT exhaust. 6k HIDS. Integrated tail.
BBudensiek is offline  
post #115 of 132 (permalink) Old 12-09-2012, 11:55 AM
I eat my R6
 
bgballin26's Avatar
 
Join Date: Dec 2011
Location: Stillwater, Ok
Posts: 229
Bike: 1999 R6
Re: Bryant's 2000 R6

Quote:
Originally Posted by wutsup View Post
^Why is your sig so big?..
Every since photo bucket changed i haven't been able to figure out how to make the picture smaller.

I have not tried the equalizer's but i will

99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
bgballin26 is offline  
post #116 of 132 (permalink) Old 12-09-2012, 05:51 PM Thread Starter
Go Fast or Go Home
 
Join Date: Jun 2012
Location: Waterloo, IA
Posts: 512
Bike: 2000 Yamaha R6
Re: Bryant's 2000 R6

i had almost the same problem that you had bg and i got the equalizers and it fixed it

2000 Yamaha R6 17,xxx miles. Carbon fiber pieces. DanMoto Carbon GT exhaust. 6k HIDS. Integrated tail.
BBudensiek is offline  
post #117 of 132 (permalink) Old 12-09-2012, 08:07 PM
I eat my R6
 
bgballin26's Avatar
 
Join Date: Dec 2011
Location: Stillwater, Ok
Posts: 229
Bike: 1999 R6
Re: Bryant's 2000 R6

I'm going to tear my bike apart now that it's cold, i will try them out and see if it works, if it does i will use my r1 sockets as running lights, and i'm thinking about going back to the stock headlights, the hid's for 1st gens are way too bright, it's even bright with just 1 hooked up.

99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
bgballin26 is offline  
post #118 of 132 (permalink) Old 12-10-2012, 05:51 AM Thread Starter
Go Fast or Go Home
 
Join Date: Jun 2012
Location: Waterloo, IA
Posts: 512
Bike: 2000 Yamaha R6
Re: Bryant's 2000 R6

yea hopefully it fixes it!. What are you doing to your bike?

2000 Yamaha R6 17,xxx miles. Carbon fiber pieces. DanMoto Carbon GT exhaust. 6k HIDS. Integrated tail.
BBudensiek is offline  
post #119 of 132 (permalink) Old 12-10-2012, 08:57 AM
I eat my R6
 
bgballin26's Avatar
 
Join Date: Dec 2011
Location: Stillwater, Ok
Posts: 229
Bike: 1999 R6
Re: Bryant's 2000 R6

I'm going to replace the mixture screws on the carbs because the rubber o-ring is bad shape, and turn them out to 2 turns to see if it helps my idle problem, also going to change the plugs, flush the coolant and change the thermo sensor because my fan won't kick on, but it works if i put it on a switch. I think my valves are loud but i had someone tell my that r6's have noisy valves, but i might check them anyways. Also need a new clutch.

99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
bgballin26 is offline  
post #120 of 132 (permalink) Old 12-10-2012, 12:22 PM Thread Starter
Go Fast or Go Home
 
Join Date: Jun 2012
Location: Waterloo, IA
Posts: 512
Bike: 2000 Yamaha R6
Re: Bryant's 2000 R6

Yup thats my sprinmg project... jet carbs, and also are your mixture screws at factory adjustments? or have you messed with them? I wish i could get to my bike but its in storage til spring and also i got some visual mods im going to do i cant wait just to see what the jet kit will do! im going with a factory pro jet kit as well... is it difficult to figure out what setting to use? Bcuz im not looking forward to trying one than taking it all back apart to try another setting... lol id like to get it set right the first time

2000 Yamaha R6 17,xxx miles. Carbon fiber pieces. DanMoto Carbon GT exhaust. 6k HIDS. Integrated tail.
BBudensiek is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R6 Forum: YZF-R6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 YZF R6 Race Prep - $2000 tsd345 Bikes For Sale 0 05-30-2012 05:43 PM
FS: 2000 - R6 - Black - $2000 - 7000 miles - Michigan somewhere spdrace11 Bikes For Sale 2 08-02-2011 03:03 PM
FS: 2000 - R6 - Champions Edition - $2000 OBO - 30,000 miles - Washington Illernoise Bikes For Sale 14 11-21-2010 09:03 PM
FS: 2000 - R6 - Blue - $2000 - 32,000 miles - Albany, Oregon yotaismygame Bikes For Sale 1 05-21-2010 07:31 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome