Yamaha R6 Forum: YZF-R6 Forums banner

Is this the right part?

800 views 7 replies 7 participants last post by  DTcrew4 
#1 ·
I need to order a hose and can't tell if this is the correct one. I need some reassurance.






Is that hose #16 on this



If you don't think that's the correct hose let me know what you think it may be. I need to order it asap.

Thanks for the help! :toocool:
 
See less See more
3
#4 ·
It looks like it to me as well. I though have to ask why not take the hose off and go to a local auto parts place and just match something up. It would be the same hose just alot cheaper i bet. There are all sorts of molded hoses for cars. you may have to cut some length off of one or both sides. The bend is all you really need.
 
#8 ·
I am going oem because it's a conical hose. Otherwise I would just buy it from an auto parts store and cut it to length.

It's leaking at the clamps and I could probably get away with just tightening them down a little but I figure, why not change it out if it's leaking. It's got some miles on it so might as well.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top