Custom FP Racing Levers from Motomummy! Pics! - Yamaha R6 Forum: YZF-R6 Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 60 (permalink) Old 11-22-2009, 03:54 PM Thread Starter
VIRTUOSO
 
FactoryRaceCar's Avatar
 
Join Date: Jun 2009
Posts: 734
Bike: '09 R1 & R6 '10 S1000RR
Custom FP Racing Levers from Motomummy! Pics!

A couple weeks ago I got my OEM levers, rearsets, kickstand and a few other items powdercoated flat black by a forum member. Everything came out top notch except for the brake and clutch levers. They had some blemishes in them and I just did not want to bother resending them.

I started looking for aftermarket levers. I had ASVs on my 07 R1 and even though I loved them I found it hard to mess with the small adjuster dials while riding. Another problem was I wanted the levers flat black to match everything else.

A friend of mine got FP Racing levers on his bike and even though I was hesitant, I rode his bike and found them better than the ASVs I had on my R1! I contacted Corey from motomummy and being difficult as always I asked him if I could get them in flat black? He told me that currently they were not offered in flat black but he would get back to me in next couple days to see what could be done. He did get back with me the next day and told me that FP Racing was going to do a custom set for me in flat black on my request!

As always, Corey delivered! These are limited edition levers and are called "Stealth Black". The quality, fit and finish and the functionality is just simply AMAZING on these! Not to mention they come with lifetime warranty as well! I can quickly change the settings with my thumb while riding on these unlike my ASVs. With the price, quality, custom free engraving and warranty these are the best bang for the buck deal out there right now!

Check these out on motomummy website here http://www.motomummy.com/store/produ...9&cat=0&page=1

On to the pics



















And these 3 pictures, just 'cos I can








All bone stock. All stolen
FactoryRaceCar is offline  
Sponsored Links
Advertisement
 
post #2 of 60 (permalink) Old 11-22-2009, 03:58 PM
Original Member-Vendor

 
Agg2001's Avatar
 
Join Date: Jun 2008
Location: www.AggRacing.com, TX-USA
Posts: 30,406
Bike: 2007 R6, 2005 CRF250r
Send a message via AIM to Agg2001 Send a message via MSN to Agg2001 Send a message via Yahoo to Agg2001
Re: Custom FP Racing Levers from Motomummy! Pics!

not bad... still like my asv's better. but that's why we all have our own bikes.



High-end, AFFORDABLE, parts and accessories for your bike!

ALWAYS free shipping to the USA, with 1-3 day delivery times.


Agg2001 is offline  
post #3 of 60 (permalink) Old 11-22-2009, 04:30 PM Thread Starter
VIRTUOSO
 
FactoryRaceCar's Avatar
 
Join Date: Jun 2009
Posts: 734
Bike: '09 R1 & R6 '10 S1000RR
Re: Custom FP Racing Levers from Motomummy! Pics!

Nothing wrong with ASVs. I just did not want them this time around



All bone stock. All stolen
FactoryRaceCar is offline  
post #4 of 60 (permalink) Old 11-22-2009, 04:40 PM
deez nutz
 
(RRRRRR)'s Avatar
 
Join Date: Apr 2009
Location: harrisburg, pa
Posts: 1,556
Bike: 08 R6
Re: Custom FP Racing Levers from Motomummy! Pics!

can you get those in shorties
(RRRRRR) is offline  
post #5 of 60 (permalink) Old 11-22-2009, 04:41 PM Thread Starter
VIRTUOSO
 
FactoryRaceCar's Avatar
 
Join Date: Jun 2009
Posts: 734
Bike: '09 R1 & R6 '10 S1000RR
Re: Custom FP Racing Levers from Motomummy! Pics!

Quote:
Originally Posted by (RRRRRR) View Post
can you get those in shorties
Absolutely.



All bone stock. All stolen
FactoryRaceCar is offline  
post #6 of 60 (permalink) Old 11-22-2009, 04:47 PM
I <3 trucks
 
Doc-Ram's Avatar
 
Join Date: Apr 2008
Location: East Bay
Posts: 14,797
Bike: 08R6, 08250R, '12Panigale
Re: Custom FP Racing Levers from Motomummy! Pics!

looks real nice, but i still like my gilles for more adjustibility and ergonomics
Doc-Ram is offline  
post #7 of 60 (permalink) Old 11-22-2009, 04:52 PM
I eat my R6
 
JDN0987's Avatar
 
Join Date: Aug 2009
Location: Prichard, WV
Posts: 875
Bike: 2008 R6 LE
Re: Custom FP Racing Levers from Motomummy! Pics!

Those look great. And I like the custom engraving you can put on them.

Current mods:
Leo Vince Full exhaust
PCV with autotune
Graves FE
Proton flushies
Graves block off plates
Puig windscreen
BMC Race filter
ASV shorty levers
Evotech frame sliders
Motovation Accessories bar ends
DDM Tuning 8000K HID's
FXR Bi-xenon Projectors
Dual halo's (white and amber)
JDN0987 is offline  
post #8 of 60 (permalink) Old 11-22-2009, 05:00 PM
Riding his own ride...
 
gsxcorey's Avatar
 
Join Date: Apr 2006
Location: Austin, TX
Posts: 4,722
Re: Custom FP Racing Levers from Motomummy! Pics!

looks good. One thing that fp does that several others don't with that type of adjuster is that on position 6 it goes against the perch and the perch is raised up so it's hard to get your finger on the adjuster on the side of the perch to move the adjuster back down. to counter act this fp machined the perch down level with the lever so that even on position 6 you can easily get your thumb to the other side of the adjuster to move it back down.

glad you like them factoryracecar We are working on some more custom products in that color now. You got us going and now we can't stop with that color

don't fold the levers too much or they can loosen up over time. obviously they are designed to do that on a crash. it takes a lot of folding to loosen them up, but just wanted to warn you. won't hurt to do it a few times at all. we have a set that we folding in the store to see how long it takes before it will affect the function and it's around 40 times, but i still don't recommend doing it too much obviously.

Again, glad you like them
gsxcorey is offline  
post #9 of 60 (permalink) Old 11-22-2009, 05:56 PM Thread Starter
VIRTUOSO
 
FactoryRaceCar's Avatar
 
Join Date: Jun 2009
Posts: 734
Bike: '09 R1 & R6 '10 S1000RR
Re: Custom FP Racing Levers from Motomummy! Pics!

^^^ I can't wait to try another 'custom' product in the same color

Thank you once again Corey



All bone stock. All stolen
FactoryRaceCar is offline  
post #10 of 60 (permalink) Old 11-22-2009, 06:01 PM
my R6 eats my wallet
 
TopR6's Avatar
 
Join Date: Mar 2009
Location: texas
Posts: 626
Bike: 2007 Charcoal R6
Re: Custom FP Racing Levers from Motomummy! Pics!

nice endorsement deal you got going factory race car.

i wouldnt mind some free levers j

no but srsly they look good, im still hesitant to buy levers but if i do i will probably get these. (if they have them flat black with red adjusters)

btw: FRC what brand sliders are those? i think i have the same ones but i forgot what brand they are, and today i lost one/got stolen.

2007 R6 Charcoal | FE | Motodynamic smoked taillight | DIY Projector mod | No-cut frame sliders| Black third eye + LEDS
TopR6 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R6 Forum: YZF-R6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Custom Exhaust Pics kstark Exhaust and fuel delivery 33 04-21-2009 05:02 PM
looking for an opinion on custom levers, pig spotters, sorpio alarm ADRENALINE RUSH Appearance and Exterior Mods 15 03-31-2008 05:26 PM
Pazzo Racing Levers saefirebird General Discussions 4 03-11-2008 02:55 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome