Originally Posted by toysareforboys
Can you do 3000k for both sets of HID's?
I spoke to my supplier, and i can get 3000k bulbs for the inner stock projectors, but not for the outer projectors.
I will check one more place, and see if they are made in 3000k in that size.
Do you have any pics of the back of a finished headlight housing? I would like to see just how many wires, ballasts, switchs or igniters I have to hook up on my end if I order your product. Also do any of the kits that come w/ a color matched bulb for the third eye?
Here is the back of the headlight, its a very clean install, all the accesory wires are ran through the stock bottom location, and only the hid bulb by it self is on top, so if you ever need to change bulbs its very easy, since there are no wires going through there.
the bottom stock location is not visible when the headlight is installed so the install will look very clean on the bike.
for a typical install with angel eyes, you will need to hide 2 superslim hid ballasts and 2 small halo inverter boxes, about 2"x1" in size.
The wiring is provided, which consists of 2 motorcycle relay harnesses, which run to your battery for power, so the stock wiring is not stresses and the other end connects to the OEM plugs.