Any 06+ R6r stubby exhaust for 03-05 R6 or R6s - Page 16 - Yamaha R6 Forum: YZF-R6 Forums
 
LinkBack Thread Tools Display Modes
post #151 of 200 (permalink) Old 12-02-2012, 09:45 PM Thread Starter
I eat my R6
 
fleixius's Avatar
 
Join Date: Apr 2008
Location: Baltimore
Posts: 723
Bike: 07 R6s
Send a message via AIM to fleixius
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

Quote:
Originally Posted by ATL View Post
Simple question:

If you have no immediate plans to get an ECU/reflash, PowerCommander or Juicebox, and had the 06+ R6 stubby exhaust can for free, would you remove your stock exhaust and pay to have someone install/correctly fashion the 06+ can on there?

Or would you hold out on installing it until you purchased a PC (or other fuel remap)?
-Chris
I originally did my swap with no intention of buying a PC. So yeah, just do it.

--- FLei[X]iuS ---

2007 Candy Red R6s

[Performance]
- Power Commander 3 USB
- -1/+2 520 Conversion
- Custom Stubby Yoshi TRC CF Exhaust
- BMC Race Filter
- Greggs Smog Blockoffs
- Pilot Powers 2CT front/rear

[Visual/Misc]
- Pazzo Red Shorties
- Red Angel Eyes
- Dual Headlight Mod with HIDs / Autoswitch
- Custom LED Passenger Peg Turn Signals
- LED Front Flushmount Turn Signals
- D3 Driven Grips
- T-Rex Spool Sliders
- Shogun Frame Sliders
- Dark Smoke Screen
- Battery Tray Fender Eliminator
fleixius is offline  
Sponsored Links
Advertisement
 
post #152 of 200 (permalink) Old 12-03-2012, 04:46 PM
ATL
Adrenaline Junkie
 
Join Date: Aug 2012
Location: SLC Utah
Posts: 33
Bike: 2003 R6 (blue)
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

Quote:
Originally Posted by fleixius View Post
I originally did my swap with no intention of buying a PC. So yeah, just do it.
Did you cut off the valve or just leave it fixed in the open position?
-Chris

ATL is offline  
post #153 of 200 (permalink) Old 12-04-2012, 01:40 AM Thread Starter
I eat my R6
 
fleixius's Avatar
 
Join Date: Apr 2008
Location: Baltimore
Posts: 723
Bike: 07 R6s
Send a message via AIM to fleixius
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

I didnt have an EXUP, but most take them off.

--- FLei[X]iuS ---

2007 Candy Red R6s

[Performance]
- Power Commander 3 USB
- -1/+2 520 Conversion
- Custom Stubby Yoshi TRC CF Exhaust
- BMC Race Filter
- Greggs Smog Blockoffs
- Pilot Powers 2CT front/rear

[Visual/Misc]
- Pazzo Red Shorties
- Red Angel Eyes
- Dual Headlight Mod with HIDs / Autoswitch
- Custom LED Passenger Peg Turn Signals
- LED Front Flushmount Turn Signals
- D3 Driven Grips
- T-Rex Spool Sliders
- Shogun Frame Sliders
- Dark Smoke Screen
- Battery Tray Fender Eliminator
fleixius is offline  
post #154 of 200 (permalink) Old 02-25-2013, 05:00 PM
Just made this great wheelie.. did you see it?!
 
gerrard06's Avatar
 
Join Date: Feb 2012
Location: San Antonio,TX
Posts: 40
Bike: Yamaha R6
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

Quote:
Originally Posted by 03r6special View Post
i have the GYTR shorty on my 2003 r6, its really loud... i like it though. only drawback is that it is kind of high pitch. not as deep as i would like. but looks way better than before. it wasnt that hard, it just took a couple runs to the autopart store, and couple hours. takes a bit of fab work though.
was it hard to install the gytr? what did u do to make it fit?
gerrard06 is offline  
post #155 of 200 (permalink) Old 03-22-2013, 03:43 PM
Just made this great wheelie.. did you see it?!
 
Join Date: Mar 2012
Posts: 49
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

alright so this is my definite mod to start off the summer. I am not sure what brand slip on I am going with but have a couple newbie questions. After reading all 16 pages.....I have a 08 R6s. What year/model do I order the stubby exhaust for? Once I get the exhaust, Do i have to trim the exhaust itself or my header, or is it already at a length that will work? or is it personal preference as to the length?

Any issues about doing this with a 08 R6S that I need to know about?

THanks
blackmer826 is offline  
post #156 of 200 (permalink) Old 03-22-2013, 03:46 PM
Two Bro's=ORGASM *nohomo*
 
toysareforboys's Avatar
 
Join Date: Mar 2009
Location: Whitby, Ontario, Kanada
Posts: 3,305
Bike: 07 R1
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

Quote:
Originally Posted by blackmer826 View Post
What year/model do I order the stubby exhaust for?
You order the exhaust for any 2003 to 2005 R6 or 2006 to 2009 R6S. Competition Werks, Riot HR1, etc. etc.

Quote:
Originally Posted by blackmer826 View Post
Once I get the exhaust, Do i have to trim the exhaust itself or my header, or is it already at a length that will work? or is it personal preference as to the length?
When you get it you don't have to trim anything, it'll hook right up, mount perfect, etc.

Quote:
Originally Posted by blackmer826 View Post
Any issues about doing this with a 08 R6S that I need to know about?
Because any slip-on removes the catalytic converter on your R6S it's a good idea to pickup a PCV so that you can load in a proper fuel map so your bike won't run scary lean and suck donkey balls down low.

-Jamie M.

toysareforboys is offline  
post #157 of 200 (permalink) Old 03-22-2013, 03:50 PM
Stunt Rider
 
ridick_bowen's Avatar
 
Join Date: Aug 2007
Location: Irvine
Posts: 7,923
Bike: R6/R1 Hybrid
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

I got a can off a CBR 250. Fit perfectly. Clamped it down with a u bolt.

Done! You can close this thread meow.

R6/R1 hybrid
Zeus Armor crash cage, sub-cage, stunt stay, subframe brace, R1 rectifier mod. ATC steel subframe & ATC 12 bar. Runman big rotor HB setup with r6 monoblock calipers. Stunter-X res clamp hose kit. Dented gas tank with HT moto grip. Kleen air mod. GPR V1 steering damper. Brembo RCS 19. SS brake lines. BMC air filter. ATC adjustable clip ons. Brembo 16x18 HB. 05 R1 front forks. 06 FZ-6 rear rotor. NGK plugs. DCP radiator cage. LP gas cap. Secondary radiator fan switch setup. HT Moto Rear Seat. Leo Vince CBR 250 exhaust. Naarden shark fin. 14/54t 520 gearing. Intergrated rear turn signals. Engine Ice. Shaved wind screen.
ridick_bowen is offline  
post #158 of 200 (permalink) Old 03-22-2013, 06:47 PM
Just made this great wheelie.. did you see it?!
 
Join Date: Mar 2012
Posts: 49
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

Quote:
Originally Posted by toysareforboys View Post
You order the exhaust for any 2003 to 2005 R6 or 2006 to 2009 R6S. Competition Werks, Riot HR1, etc. etc.

When you get it you don't have to trim anything, it'll hook right up, mount perfect, etc.

Because any slip-on removes the catalytic converter on your R6S it's a good idea to pickup a PCV so that you can load in a proper fuel map so your bike won't run scary lean and suck donkey balls down low.

-Jamie M.
I already have a D &D slip on which was on it when I bought it. As far as I know there is no Power Commander....seems to run good to me but would like to get a power commander this summer. What about an 06-10 r6 exhaust? would that mount up good or is it different. I think I am between the HR1 and the Olson as of now....but I am still not sure
blackmer826 is offline  
post #159 of 200 (permalink) Old 03-22-2013, 07:09 PM
Just made this great wheelie.. did you see it?!
 
Join Date: Mar 2012
Posts: 49
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

what about two brothers? I cannot find any shorty two bros anywhere that would fit.

Also anyone who has a GYTR shorty how did it go? saw a lot of posts throughout discussing issues with have to directly welding it to the headers because the two pipes were the same diameter.
blackmer826 is offline  
post #160 of 200 (permalink) Old 03-22-2013, 07:25 PM
Just made this great wheelie.. did you see it?!
 
Join Date: Mar 2012
Posts: 49
Re: Any 06+ R6r stubby exhaust for 03-05 R6 or R6s

just found this Two Bros...would it work?????

http://store.58cycle.com/Two_Brother...%20r6%2003.htm

sorry for the questions but this is going to be my first motorcycle mod...usually do snowmobiles or wheelers.
blackmer826 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R6 Forum: YZF-R6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
'06 R6 vs '06 GSX-R600 i've ridden both!!!! Joe2D General Discussions 56 02-19-2010 09:31 PM
Full Exhaust for 03-04-05 R6 and R6s For Sale Venomous Bikes Parts For Sale 5 02-16-2010 12:37 PM
03-05 R6 performance parts...exhaust...PC3...etc BlkLT1Z28 Bikes Parts For Sale 20 11-09-2008 04:04 AM
WTB: 06-08 Shorty Stock R6 Exhaust & PUIG Smoke/D-Smoke Windscreen (03-05 R6) KyleK29 Bikes Parts For Sale 0 09-29-2008 11:19 AM
Aftermarket K5 Gixxer exhaust on an 03 R6 klutch_r Exhaust and fuel delivery 1 07-25-2007 06:01 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome