How to do... Keyless ignition.... - Page 15 - Yamaha R6 Forum: YZF-R6 Forums
Reply
 
LinkBack Thread Tools Display Modes
post #141 of 170 (permalink) Old 11-20-2012, 10:04 PM
MY MV EATS MY R6
 
Sammy Bono's Avatar
 
Join Date: Jan 2008
Posts: 10,726
Bike: The kind you pedal
Re: How to do... Keyless ignition....

Alright so I followed the wires from the ignition down to where they clip in on the left side of the bike. I unclipped the red and white connectors. When I put a small wire to the inside of the white clip the fuel tank primes and lights come on. However the bike will not crank...I also kept the red clip plugged in and nothing. Then I connected a wire to the red clip and still nothing. What am I doing wrong? I have the key but just was wondering how it worked. Its an 09 R6 btw. It is super easy on the 600rr but it seems Yamaha has made it a little harder

Sammy Bono is offline  
Sponsored Links
Advertisement
 
post #142 of 170 (permalink) Old 11-21-2012, 09:42 AM
Two Bro's=ORGASM *nohomo*
 
toysareforboys's Avatar
 
Join Date: Mar 2009
Location: Whitby, Ontario, Kanada
Posts: 3,305
Bike: 07 R1
Re: How to do... Keyless ignition....

Quote:
Originally Posted by Sammy Bono View Post
Alright so I followed the wires from the ignition down to where they clip in on the left side of the bike. I unclipped the red and white connectors. When I put a small wire to the inside of the white clip the fuel tank primes and lights come on. However the bike will not crank...I also kept the red clip plugged in and nothing. Then I connected a wire to the red clip and still nothing. What am I doing wrong? I have the key but just was wondering how it worked. Its an 09 R6 btw. It is super easy on the 600rr but it seems Yamaha has made it a little harder
Did you twist the two small wires together? Need that for the fuel injectors to squirt

-Jamie M.

toysareforboys is offline  
post #143 of 170 (permalink) Old 11-21-2012, 10:02 AM
pin it to win it
 
bryan j's Avatar
 
Join Date: Oct 2010
Location: forsyth GA
Posts: 8,010
Bike: 07 r6, 06 yz250f
Send a message via AIM to bryan j
Quote:
Originally Posted by toysareforboys View Post
Did you twist the two small wires together? Need that for the fuel injectors to squirt

-Jamie M.
Ye you gotta make em squirt or you're doing it wrong...

Go fast parts:
Pipercross race filter, Leo sbk slip on, 05 header mod, pcv, bauce racing ecu flash, agg smog block offs, quick turn throttle, 520 rk gxw chain -1-1 renthal sprockets, ebc hh pads
, Shorai battery.

Body:
Robby moto sbk rearsets, woodcraft clip ons & sliders, armor bodies sbk fairings, db screen, vortex v3 gas cap, keyless ignition mod, agg sbk res kit,


Support the forum Vendors
bryan j is offline  
post #144 of 170 (permalink) Old 11-21-2012, 10:19 AM Thread Starter
crashing aint so bad
 
luke geis's Avatar
 
Join Date: Nov 2006
Location: santa barbara, ca.
Posts: 2,271
Bike: 2005 red r6
Images: 10
Re: How to do... Keyless ignition....

Some updates to this thread:

1. The 06 and up R6V newer generation machines need a 1" pvc fitting to use as a base for the rocker switch. The 1-1/4" is too big.

2. It seems that the newer bikes are the same as the 03-05 machines as far as wiring diagrams go. Simply take the two small blue and black wires and twist them together. The orange wire is no longer needed, so cap it off. The red and brown wires will go to your switch of choice.

3. If you use a three pronged illuminated switch, you must be aware that the connections are directional. The ground must be brown, the hot or load must be red and earth must be grounded to the bikes chassis.

4. If you go to a single switch approach, you will have to follow your wiring looms down under the air box and carefully expose the needed wires form the loom. The only wires of concern are the ( red and white ) and ( black and red )wires. Following the schematic posted on the first page you should be able to easily see what needs to be done. It can't be any simpler.

5. The euro bikes with immobilizer are different, but it appears that doing the single switch approach bypasses it? I'm still not sure so someone please confirm the needed process for the euro machines.

luke geis is offline  
post #145 of 170 (permalink) Old 11-21-2012, 10:22 AM
Two Bro's=ORGASM *nohomo*
 
toysareforboys's Avatar
 
Join Date: Mar 2009
Location: Whitby, Ontario, Kanada
Posts: 3,305
Bike: 07 R1
Re: How to do... Keyless ignition....

Quote:
Originally Posted by luke geis View Post
5. The euro bikes with immobilizer are different, but it appears that doing the single switch approach bypasses it? I'm still not sure so someone please confirm the needed process for the euro machines.
I have not been able to do keyless ignition on any Euro/Canadian bikes unless I flashed the ECU and removed the immobilizer code first.

-Jamie M.

toysareforboys is offline  
post #146 of 170 (permalink) Old 11-21-2012, 01:07 PM
MY MV EATS MY R6
 
Sammy Bono's Avatar
 
Join Date: Jan 2008
Posts: 10,726
Bike: The kind you pedal
Re: How to do... Keyless ignition....

Um I dis connected the red and white clips from ignition and wired the red one together and the white one together. bike lights come on and fuel pump primes but no power to starter. Am I supposed to connect them together.

Sammy Bono is offline  
post #147 of 170 (permalink) Old 11-21-2012, 01:08 PM
Suk it, Lee
 
Ryan5544's Avatar
 
Join Date: Jul 2010
Posts: 19,064
Re: How to do... Keyless ignition....

In for the, ''I blew my gas tank up.''
Ryan5544 is offline  
post #148 of 170 (permalink) Old 11-21-2012, 02:20 PM
MY MV EATS MY R6
 
Sammy Bono's Avatar
 
Join Date: Jan 2008
Posts: 10,726
Bike: The kind you pedal
Re: How to do... Keyless ignition....

Quote:
Originally Posted by Ryan5544 View Post
In for the, ''I blew my gas tank up.''
It's okay I have 3 back up bikes for it.

Sammy Bono is offline  
post #149 of 170 (permalink) Old 11-21-2012, 08:22 PM Thread Starter
crashing aint so bad
 
luke geis's Avatar
 
Join Date: Nov 2006
Location: santa barbara, ca.
Posts: 2,271
Bike: 2005 red r6
Images: 10
Re: How to do... Keyless ignition....

Refer to the wiring diagram on page one. The only wire that needs to be cut is the red and white one. That wire is then split between the switch and the red wire from the original ignition switch. But you must refer to the diagram for correctness of the modification.

luke geis is offline  
post #150 of 170 (permalink) Old 12-07-2012, 05:41 AM
Just made this great wheelie.. did you see it?!
 
Caliboy's Avatar
 
Join Date: May 2010
Location: bellflower, ca
Posts: 33
Bike: 09 R6
Images: 3
Re: How to do... Keyless ignition....

question, im not sure if its been answered already or not but, if i do keyless on my bike will my headlights still work?
Caliboy is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R6 Forum: YZF-R6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Keyless ignition mod for track bike r6addict How To's... 145 12-17-2014 02:40 PM
Can't get Ignition Bolts out!!! 04YamahaR6IL Garage / Mechanical Help 11 05-14-2012 03:02 PM
Keyless Ignition ishp2005 How To's... 5 05-30-2008 10:25 AM
MSD Digital Ignition Symbiote R6 Garage / Mechanical Help 4 06-13-2007 06:27 PM
Stuck ignition The_RippeR Garage / Mechanical Help 4 10-06-2006 01:42 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome