Re: speed problems... then hesitation
so i cleaned the tps and it still didnt sound to healthy... i let the bike warm up to operating temp and sprayed the headers with water mist... the header on the throttle side didnt evaporate any water. so i touched it... and cool. so i know that side isnt firing. coil #4 is the throttle side
i tested all coils and this is what i got. do i need 4 new coils???
aslo specs state primary 0.24-0.32 and secondary 5.0-6.8 k
i assume that the primary reading 2.1 = 0.21 when using 200 ohm setting???
Last edited by tekk220; 10-23-2012 at 11:38 AM.