Ignition switch problems
I'm running a 2007 R6S that I bought going on a month ago. About two weeks ago I was out for a ride it just cut out and when I tried to restart it I wasn't getting anything from the engine start button. So for the last two week I have been trying to figure out how to fix this. If I cross the positive wire with the starter wire it will start and run til I hit the kill switch but will not start again by just the push of the bottom. I have replaced the starter relay and that did nothing for it. So last night I was checking the wires under the air box I turned the key to the on position everything lights up on the dash but when I turned the key to the off position and pulled the key out everything stayed on until I unhooked the battery. So my question is could both issues be related? Should I replace the ignition switch? Does anyone have any other ideas? Thanks for taking the time to read this any help would be greatly appreciated!