R6 Service Manual Fault Code Table - Yamaha R6 Forum: YZF-R6 Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 21 (permalink) Old 07-02-2007, 03:33 PM Thread Starter
.......
 
Join Date: Apr 2007
Location: brooklyn, ny
Posts: 337
R6 Service Manual Fault Code Table

11 - No normal signals are received from the cylinder identification sensor when the engine is started or while the vehicle is being driven.

12 - No normal signals are received from the cranshaft position sensor.

13 - Intake air pressure sensor: open or short circuit detected.

14 - Intake air pressure sensor: hose system malfunction (clogged or detached hose.)

15 - Throttle position sensor (for throttle valves): open or short circuit detected. Throttle position sensor (for throttle valves) coupler connection is loose.

17 - EXUP servo motor circuit: open or short circuit detected or loose connection.

18 - EXUP servo motor is stuck.

19 - Open circuit is detected in the input lead from the sidestand switch to the ECU.

20 - When the main switch is turned to "ON", the atmospheric pressure sensor voltage and intake air pressure sensor voltage differ greatly.

21 - Coolant temperature sensor: open or short circuit detected.

22 - Air temperature sensor: open or short circuit detected.

23 - Atmospheric pressure sensor: open or short circuit detected.

24 - No normal signal is received from the o2 sensor.

30 - Latch up detected. No normal signal is received from teh lean angle sensor.

33 - Open circuit detected in the primary lead of the cylinder #1 ignition coil.

34 - Open circuit detected in the primary lead of the cylinder #2 ignition coil.

35 - Open circuit detected in the primary lead of the cylinder #3 ignition coil.

36 - Open circuit detected in the primary lead of the cylinder #4 ignition coil.

39 - Open ciruit detected in a primary injector.

40 - Open circuit detected in a secondary injector.

41 - Lean angle sensor: open or short circuit detected.

42 - No normal signals are received from the speed sensor.
- Neutral switch: open or short circuit detected.

43 - Power supply to the injectors and the fuel pump is not normal.

44 - An error is detected while reading or writing on EE-PROM (CO adjustment value).

46 - Power supply is not normal.

50 - Faulty ECU memory. (When this malfunction is detected in teh ECU, the fault code number might not appear on the meter.)

59 - Throttle position sensor (for throttle cable pulley): open or short circuit detected. Throttle position sensor (for throttle cable pulley) coupler connection is loose.

60 - Throttle servo motor: open or short circuit detected. Defective throttle servo motor. Malfunction in ECU (servo motor driving system).

Er-1 - No signals are received from the ECU.

Er-2 - No signals are received from the ECU within the specified duration.

Er-3 - Data from teh ECU cannot be received correctly.

Er-4 - Non-registered data has been received from the meter.






there they all are. When something goes wrong with your bike and the fault number flashes across the lcd, you should find what you're looking for here. I know this is a large post, but I had to do it. For all those out there that need help, or would like to have a copy of the service manuals, you can find them here.

2007 Yamaha R6

http://www.r6messagenet.com/forums/p...R6_Service.pdf




Peace
Love
and chicken grease.
pnrfame is offline  
Sponsored Links
Advertisement
 
post #2 of 21 (permalink) Old 01-27-2009, 02:09 PM
Jeremy
 
Jeremy03R6's Avatar
 
Join Date: Jan 2009
Location: Dallas Texas
Posts: 34
Bike: 03 yamaha R6
Re: R6 Service Manual Fault Code Table

THANK YOU!!!! so much...now do you know how to delete them? lol

Texas born and raised.
Jeremy03R6 is offline  
post #3 of 21 (permalink) Old 02-11-2009, 11:08 AM
Ain't nothin sweet
 
Join Date: Jun 2008
Location: York, PA
Posts: 25
Bike: 03 R6
Re: R6 Service Manual Fault Code Table

so what are 1-10? i know they are adjustments, but do you have any idea where i would find out what each individual one does(couldnt find anything in the service manual, but just gave it a skim so perhaps i missed it?)?
heavyhitter121 is offline  
post #4 of 21 (permalink) Old 03-12-2009, 07:37 PM
07 r6 is rippin
 
B-Hob's Avatar
 
Join Date: Jan 2007
Location: springfield mo
Posts: 74
Bike: 07 r6 charcole and black
Images: 1
Send a message via AIM to B-Hob
Re: R6 Service Manual Fault Code Table

anyone no how much of a pain code 18 is to fix
B-Hob is offline  
post #5 of 21 (permalink) Old 08-28-2009, 07:24 AM
My R6 eats me.
 
Join Date: Jun 2008
Posts: 8
Re: R6 Service Manual Fault Code Table

anybody have a clue how to fix code 30...lean angle??
aaron07r6 is offline  
post #6 of 21 (permalink) Old 09-28-2009, 05:11 PM
Original Member-Vendor

 
Agg2001's Avatar
 
Join Date: Jun 2008
Location: www.AggRacing.com, TX-USA
Posts: 30,406
Bike: 2007 R6, 2005 CRF250r
Send a message via AIM to Agg2001 Send a message via MSN to Agg2001 Send a message via Yahoo to Agg2001
Re: R6 Service Manual Fault Code Table

sweet! bump for this find thanks to google.



High-end, AFFORDABLE, parts and accessories for your bike!

ALWAYS free shipping to the USA, with 1-3 day delivery times.


Agg2001 is offline  
post #7 of 21 (permalink) Old 09-28-2009, 05:13 PM
I <3 trucks
 
Doc-Ram's Avatar
 
Join Date: Apr 2008
Location: East Bay
Posts: 14,798
Bike: 08R6, 08250R, '12Panigale
Re: R6 Service Manual Fault Code Table

Mods, pleez sticky this thread!!!
Doc-Ram is offline  
post #8 of 21 (permalink) Old 09-28-2009, 05:34 PM
I can ban you
 
Mario J's Avatar
 
Join Date: Aug 2008
Location: San Jose, CA
Posts: 33,460
Bike: 2013 GRB STi
Images: 3
Send a message via AIM to Mario J
Re: R6 Service Manual Fault Code Table

Quote:
Originally Posted by r6rammy View Post
Mods, pleez sticky this thread!!!
+1231526547658769



I <3
Mario J is offline  
post #9 of 21 (permalink) Old 01-19-2011, 09:31 PM
candy red
 
lopez95632's Avatar
 
Join Date: Mar 2009
Location: sacramento cali
Posts: 7,467
Bike: 07 r6s
Send a message via MSN to lopez95632
Re: R6 Service Manual Fault Code Table

I'm getting 32... Any help?
lopez95632 is offline  
post #10 of 21 (permalink) Old 08-01-2011, 07:30 PM
My R6 eats me.
 
Join Date: Aug 2011
Posts: 1
Re: R6 Service Manual Fault Code Table

how to read the codes
3742tb is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R6 Forum: YZF-R6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
06 r6 Trouble code 12 "HELP"! Joshua Gomez Sr. Garage / Mechanical Help 20 02-15-2007 02:46 PM
2004 YZF-R6 Service Manual in PDF inspectorscott General Discussions 16 01-28-2006 06:26 AM
service and electrical manual pascal General Discussions 3 09-03-2004 07:21 PM
R6 Service Manual and Diagnostic codes. TexasR6 Garage / Mechanical Help 0 08-11-2004 09:18 PM
service manual help opening 03r6sbk The Computer Guru Section 2 05-23-2004 05:06 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome