I have a 07 R6 with a Leo Vince full exhaust and a Bazzaz Z-Fi/Z-AFM and I need some help. A while ago I found that the maps created by the Bazzaz Z-AFM would have lots of cells with +50% fuel added which caused the injectors to cut out. I tracked this down to the fact that the AFR calculated was 16.6 no matter what the TPS is. I thought it may be a defective Bazzaz unit but just recently I took the bazzaz O2 sensor out and with the sensor just outside the bike hooked up to the Bazzaz it would have a reading of 16.6 so I'm guessing my problem is the O2 sensor.
While I figure out where to get a new O2 sensor could someone send me their Bazzaz map if they have one handy? Preferably a setup similar to mine but I know that's not likely. (also I'm in Toronto and it's not all that warm out yet)
Thanks.
While I figure out where to get a new O2 sensor could someone send me their Bazzaz map if they have one handy? Preferably a setup similar to mine but I know that's not likely. (also I'm in Toronto and it's not all that warm out yet)
Thanks.