05 R6 injection to carb conversion - Yamaha R6 Forum: YZF-R6 Forums
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 11-06-2012, 10:42 PM Thread Starter
My R6 eats me.
Join Date: Nov 2012
Location: South Jersey
Posts: 10
05 R6 injection to carb conversion

ok, let me start by saying this motor is NOT on a bike, it's on a dirt car.. i'll post a pic below.. anyway..

the injection is already gone.. this motor has been running carbs for some time now, but the harness is a complete mess and the rectifier harness is missing. this was someone else's brain child and i want to straighten it out, before the 2013 season gets any closer. i want to keep the carbs, but replace the harness and get the rectifier set up and generating power again. biggest reason for wanting to stick with the carbs, is the fact that A: we run methanol and converted injectors are expensive and B: the injectors take a dump very easily, due to the dust, dirt and grime.

so, basically, my question is.. what year harness do i need? i would go based off the tag on the CDI box, buuut the tags are gone and it's unmarked. i need to put 2 more of these motors together over the winter and i'd like to have them complete and ready to go, with wiring harnesses and all the business, ready to go.. so please.. HEEEELLLLP lol the info is much appreciated
SMSC27 is offline  
Sponsored Links
post #2 of 5 (permalink) Old 11-06-2012, 10:54 PM Thread Starter
My R6 eats me.
Join Date: Nov 2012
Location: South Jersey
Posts: 10
Re: 05 R6 injection to carb conversion

SMSC27 is offline  
post #3 of 5 (permalink) Old 11-07-2012, 08:52 AM
"The Dude abides .. "
MELK-MAN's Avatar
Join Date: Jun 2006
Location: tampa
Posts: 4,719
Bike: 2008 yamaha R6 - 2 bikes
Re: 05 R6 injection to carb conversion

not for nothing, but we service injectors for lots of guys running sprint cars (in dirt) and i know of many racing with motors like yours. most are running FI. I am not very familiar with the cars themselves, just saying.. i don't know of any issues directly related to running in dirt. I mean, seriously, all the dirt bikes today are FI, desert racing vehicles, etc.
I would have to ask about to see if they were running methanol though.. you may be 100% correct about that being a reason you can't use fi. Just wanted to point out that dirt/environment is a totally irrelevant concern for an FI setup for dirt track/sprint cars.

sorry , i can't help with your issue..

MICHELIN, EBC, Proflow Technologies
Silkolene, JenningsGP, Engine Ice, Sharkskinz, Pit-Bull

Greg Melka - CCS roadracing and FTR harescrambles
My racin n' ridin youtube vids http://www.youtube.com/user/gregmelka?feature=mhee

Last edited by MELK-MAN; 11-07-2012 at 08:54 AM.
MELK-MAN is offline  
post #4 of 5 (permalink) Old 11-07-2012, 09:47 AM
Got street appeal?
shnormo's Avatar
Join Date: Aug 2008
Location: Canton, MI
Posts: 1,656
Bike: '04 and '07 R6
Images: 1
Send a message via AIM to shnormo
Re: 05 R6 injection to carb conversion

I don't know how to help you with the harness that is on that bike right now. I would get an 05 harness and steal just the charging system circuit off of it. If you are just worried about charging, you can take the 3 wires off the stator hook it up to a regulator rectifier (a universal one should work) and then the two wires out to a battery.
shnormo is offline  
post #5 of 5 (permalink) Old 11-07-2012, 09:43 PM Thread Starter
My R6 eats me.
Join Date: Nov 2012
Location: South Jersey
Posts: 10
Re: 05 R6 injection to carb conversion

i've got it figured out, now.. apparently the harness i have/need is 98-02, i'm told it's basically 'plug and play..' the harness i currently have is garbage, it needs to be replaced. it's been spliced, chopped, shortened and rigged, so it's a bit of a hazard in my eyes.. and sore on the eyes lol.

as far as running injection, i'll pass.. that's a boat load of cash to be spending on something that fails, often.. $750 is a lot to piss away, before even buying a power commander, to see it's full potential.. and running 116 octane isn't an option, either. in order to run gas, you MUST have a fuel bladder, which will cost you more than the meth conversion lol..

carbs may be stone-age technology, but they're a rock-solid setup and still have as much potential to run up front as the FI cars.. and the meth conversion for the carbs is only about 75 bucks LOL

SMSC27 is offline  
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the Yamaha R6 Forum: YZF-R6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with injection nvmyre Exhaust and fuel delivery 1 09-11-2012 10:51 PM
carb motor swap to fuel injection valletd7 Garage / Mechanical Help 2 06-03-2011 11:22 AM
02 r6 to 03 fuel injection? rdavis Exhaust and fuel delivery 4 01-01-2011 07:39 AM
07 carb problem (fuel injection) nico_gzertribe Exhaust and fuel delivery 11 12-28-2010 10:54 PM
fuel injection carb swap? moralez25 Garage / Mechanical Help 1 04-27-2009 06:58 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome