Stahlbus Brake Bleeding System (Speed-Bleeders) - Yamaha R6 Forum: YZF-R6 Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 47 (permalink) Old 07-02-2012, 12:29 AM Thread Starter
Parts Pimp
 
ChiefSmokeDawg's Avatar
 
Join Date: Sep 2009
Location: JerZ
Posts: 26,345
Bike: 2002 R6, 2008 R6
Stahlbus Brake Bleeding System (Speed-Bleeders) **SPECIAL**

I was finally able to get a hand (Big thanks Marcos) installing my speed bleeders and figured I had to start a thread over in this section as well as the how to's.

Anyway, These bleeders are unique in the aspect that they go into the caliper, and you open and close the small bleeder tip. This doesn't wear out your thread in your calipers over time, which can and will introduce air into the system with time after frequent brake bleeds and fluid swaps, etc.

I made a how to video and demo so you can see how well they work and what the function is.
  • The bleeders are $35 each
  • The anodized caps you see in the video and pics are $9 and fit like a glove!
  • You can save and get a four pack deal where you replace your front MC bleeder, and all three calipers on the bike for $166.95. The caps are included and come in MANY colors! This was what I did. I figured I might as well go all out!
    To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.
  • I also wanted to mention you can get individual titanium bleeders for about $147 each as well


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


SPECIAL:
For the next two weeks, (until end of January almost) if you buy the 4 pack, you will get a free brake bleeding pump!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Ask about:-STAHLBUS- -WOODCRAFT- -MOTUL- -FERODO- -BRAKE TECH- -BMC- -Battery Tender-LEO VINCE- -NGK- -EBC- -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-

Last edited by ChiefSmokeDawg; 01-09-2013 at 07:53 AM.
ChiefSmokeDawg is offline  
Sponsored Links
Advertisement
 
post #2 of 47 (permalink) Old 07-02-2012, 12:31 AM Thread Starter
Parts Pimp
 
ChiefSmokeDawg's Avatar
 
Join Date: Sep 2009
Location: JerZ
Posts: 26,345
Bike: 2002 R6, 2008 R6
Re: Stahlbus Brake Bleeding System (Speed-Bleeders)

Here's the video and some pics. Hit me up if you're interested!
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Ask about:-STAHLBUS- -WOODCRAFT- -MOTUL- -FERODO- -BRAKE TECH- -BMC- -Battery Tender-LEO VINCE- -NGK- -EBC- -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-

Last edited by ChiefSmokeDawg; 07-02-2012 at 07:01 AM.
ChiefSmokeDawg is offline  
post #3 of 47 (permalink) Old 07-02-2012, 12:32 AM Thread Starter
Parts Pimp
 
ChiefSmokeDawg's Avatar
 
Join Date: Sep 2009
Location: JerZ
Posts: 26,345
Bike: 2002 R6, 2008 R6
Re: Stahlbus Brake Bleeding System (Speed-Bleeders)


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Ask about:-STAHLBUS- -WOODCRAFT- -MOTUL- -FERODO- -BRAKE TECH- -BMC- -Battery Tender-LEO VINCE- -NGK- -EBC- -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
ChiefSmokeDawg is offline  
 
post #4 of 47 (permalink) Old 07-02-2012, 01:33 AM
#KeepPounding
 
Powerstroke87's Avatar
 
Join Date: Sep 2008
Location: NC
Posts: 1,722
Bike: 2007 R6
Re: Stahlbus Brake Bleeding System (Speed-Bleeders)

Looks so classy. I told someone the other day they were like the German Rizoma. Pricey, but functionally sexy.

-07' Team Yamaha Blue R6 "Carmen"
-05' Rubicon TJ Wrangler "?"
-08' Nissan Xterra Off-Road "Katrina"
-93' Ford F-150 sitting on 35's "Sandra"
Powerstroke87 is offline  
post #5 of 47 (permalink) Old 07-02-2012, 05:16 AM
190rwhp......:eek5
 
jwxfd's Avatar
 
Join Date: Aug 2008
Location: San Diego, CA
Posts: 10,296
Bike: 2011 S1000RR, 97 CR500
Send a message via Yahoo to jwxfd
Re: Stahlbus Brake Bleeding System (Speed-Bleeders)

Very nice...if I cracked my brake system open a lot, I'd pick up a set

They do look
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Sig courtesy of the man himself: GIjoe007



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
jwxfd is offline  
post #6 of 47 (permalink) Old 07-02-2012, 06:45 AM Thread Starter
Parts Pimp
 
ChiefSmokeDawg's Avatar
 
Join Date: Sep 2009
Location: JerZ
Posts: 26,345
Bike: 2002 R6, 2008 R6
Re: Stahlbus Brake Bleeding System (Speed-Bleeders)

Quote:
Originally Posted by Powerstroke87 View Post
Looks so classy. I told someone the other day they were like the German Rizoma. Pricey, but functionally sexy.
Good correlation!! I have only messed with other people's speed bleeders. It's such a huge help. That and the pnuematic vacuum makes it a piece of cake to flush out fluid.

Quote:
Originally Posted by jwxfd View Post
Very nice...if I cracked my brake system open a lot, I'd pick up a set

They do look
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.



To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Ask about:-STAHLBUS- -WOODCRAFT- -MOTUL- -FERODO- -BRAKE TECH- -BMC- -Battery Tender-LEO VINCE- -NGK- -EBC- -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
ChiefSmokeDawg is offline  
post #7 of 47 (permalink) Old 07-02-2012, 07:54 PM
Lifetime Premium
 
2ZZ-R6's Avatar
 
Join Date: Jul 2008
Location: Bartow, FL
Posts: 1,255
Bike: 2008 R6
Re: Stahlbus Brake Bleeding System (Speed-Bleeders)

I'll keep you in mind when I'm ready to upgrade the braking system!
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
/
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


REVIEWS:

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2ZZ-R6 is offline  
post #8 of 47 (permalink) Old 07-02-2012, 09:13 PM Thread Starter
Parts Pimp
 
ChiefSmokeDawg's Avatar
 
Join Date: Sep 2009
Location: JerZ
Posts: 26,345
Bike: 2002 R6, 2008 R6
Re: Stahlbus Brake Bleeding System (Speed-Bleeders)

Quote:
Originally Posted by 2ZZ-R6 View Post
I'll keep you in mind when I'm ready to upgrade the braking system!
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.
:
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


Updated first post with promotional deal for the next 4 people who get the 4 pack. The 1st set buyer, you will get yours in person along with the bonus too.
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


Thanks guys!


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Ask about:-STAHLBUS- -WOODCRAFT- -MOTUL- -FERODO- -BRAKE TECH- -BMC- -Battery Tender-LEO VINCE- -NGK- -EBC- -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
ChiefSmokeDawg is offline  
post #9 of 47 (permalink) Old 07-02-2012, 09:40 PM
Track=Cocaine
 
R-Silaxin's Avatar
 
Join Date: Sep 2009
Location: El Paso, TX
Posts: 13,523
Bike: 06 R-6 Deathraven
So sick! I'll pick up a set of these at some point for sure... Are they needed now? Not really... But soon enough they will be ideal and I'll pick up a set for sure!

Keep up the great work Anthony!


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

RIP Richard Bishop. You're a great friend and someone I will never forget.
MY TRACK BUILD THREAD
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

MY TRACK DAY THREAD
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

MY YOUTUBE CHANNEL
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

MY FACEBOOK
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


MY XBL GAMERTAG: AmericanGingers
R-Silaxin is offline  
post #10 of 47 (permalink) Old 07-03-2012, 05:30 AM Thread Starter
Parts Pimp
 
ChiefSmokeDawg's Avatar
 
Join Date: Sep 2009
Location: JerZ
Posts: 26,345
Bike: 2002 R6, 2008 R6
Re: Stahlbus Brake Bleeding System (Speed-Bleeders)

Quote:
Originally Posted by R-Silaxin View Post
So sick! I'll pick up a set of these at some point for sure... Are they needed now? Not really... But soon enough they will be ideal and I'll pick up a set for sure!

Keep up the great work Anthony!


To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.
Thanks Adam! You should bleed before each track outing, and when it comes down to it, we may not have the expensive brembo calipers, but I'm not into wearing my threads and shit like that.

Moisture gets into the brake system unbelievably fast in these humid temps and the boiling point on the brake fluid decreases DRASTICALLY! These are definitely gonna be a big time saver and just look too
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.
to pass on.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Ask about:-STAHLBUS- -WOODCRAFT- -MOTUL- -FERODO- -BRAKE TECH- -BMC- -Battery Tender-LEO VINCE- -NGK- -EBC- -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
-
ChiefSmokeDawg is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R6 Forum: YZF-R6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
How to install Stahlbus Bleeder Valve (Speed Bleeders) And Demo ChiefSmokeDawg How To's... 5 07-02-2012 08:38 AM
Speed Bleeders! Jiggaman13 General Discussions 8 05-26-2011 12:48 PM
Speed Bleeders? r3x1mu5 General Discussions 30 12-14-2010 10:25 AM
Speed Bleeders or a Mityvac? Postman General Discussions 7 08-08-2009 04:54 PM
Speed bleeders.... anyone use these? clevisR6 General Discussions 0 06-30-2004 08:35 AM

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome