RidersDiscount
12-09-2009, 06:28 AM
Lots of racers and street riders trust Bazzaz Performance Design components to give them the power they need with no-hassle installation and superior product support. We have all BPD ECUs: Z-Fi, Z-Fi QS (with quick shifter) and Z-Fi TC (quick shifter AND traction control) for YZF-R6s. Each Bazzaz ECU come with two maps pre-programmed into the device – one for stock exhaust and one for slip-on applications. These maps can be modified by any competent dyno tuner for your specific needs.
To avoid spending time and $$$ at the dyno, get a Z-AFM self-mapper kit with any Z-Fi ECU. The Z-AFM self-mapper builds a custom map for your bike by just riding around town or the racetrack. The device automatically calculates fuel maps based upon engine RPM and throttle position based upon an optimal (or user-programmable) exhaust fuel/air ratio. You get maximum performance from your bike no matter what fuel you use or atmospheric conditions.
Bazzaz also offers a handlebar-mounted map selector switch that is compatible with all Z-FI ECUs. You can switch between two different pre-programmed maps on the fly. For the Z-Fi TC system, there’s also a handlebar-mounted switch that not only has map select capabilities, but also allows the amount of traction control to be adjusted by the rider on the fly.
All Bazzaz products come with all wiring, mounting harnesses and clear installation instructions for simple installation.
The best way to get any Bazzaz Performance Design ECU is to call TJ at 866-931-6644 ext 817 and make sure you tell him you’re a R6-forum member. You can also email us at R6 at RIDERSDISCOUNT dot COM and tell us what bike you have and the system you want. If you’re emailing us, please include BAZZAZ in the subject line.
http://www.ridersdiscount.com/forum/bazzaz/zfi_tc_bazzaz_performance_fi_traction_control_3.jp g
The traction control/fuel map switch for the Z-Fi TC kit.
http://www.ridersdiscount.com/forum/bazzaz/traction_control_switch_bazzaz_performance_1.jpg
To avoid spending time and $$$ at the dyno, get a Z-AFM self-mapper kit with any Z-Fi ECU. The Z-AFM self-mapper builds a custom map for your bike by just riding around town or the racetrack. The device automatically calculates fuel maps based upon engine RPM and throttle position based upon an optimal (or user-programmable) exhaust fuel/air ratio. You get maximum performance from your bike no matter what fuel you use or atmospheric conditions.
Bazzaz also offers a handlebar-mounted map selector switch that is compatible with all Z-FI ECUs. You can switch between two different pre-programmed maps on the fly. For the Z-Fi TC system, there’s also a handlebar-mounted switch that not only has map select capabilities, but also allows the amount of traction control to be adjusted by the rider on the fly.
All Bazzaz products come with all wiring, mounting harnesses and clear installation instructions for simple installation.
The best way to get any Bazzaz Performance Design ECU is to call TJ at 866-931-6644 ext 817 and make sure you tell him you’re a R6-forum member. You can also email us at R6 at RIDERSDISCOUNT dot COM and tell us what bike you have and the system you want. If you’re emailing us, please include BAZZAZ in the subject line.
http://www.ridersdiscount.com/forum/bazzaz/zfi_tc_bazzaz_performance_fi_traction_control_3.jp g
The traction control/fuel map switch for the Z-Fi TC kit.
http://www.ridersdiscount.com/forum/bazzaz/traction_control_switch_bazzaz_performance_1.jpg