|
daft 04-08-2010, 09:56 AM anyone know what the stock settings are for the 09 R6? as in, how many lines should be visible on the forks above the triple clamp? how many clicks for preload, etc. anyone? tfs32 04-08-2010, 09:59 AM not sure on what you are asking, But From what I understand, the 08-09 forks stick through the upper treeabout 10MM stock And then the preload depends on you, You Weight riding style but I think from the factory it is adjusted all the way down. Do some searching in the Suspension Page and read up as much as you can! tfs32 04-08-2010, 10:02 AM Oh and check section 3 of your Owners Manual, it has all the stock settings written down already EDIT Mine on my 07 is in section 3-18 daft 04-08-2010, 10:32 AM don't have an owners manual. :( is there a digital copy lurking around? i know there is for my R1. can't find anything for the R6. tfs32 04-08-2010, 10:40 AM Section 4-19 :cheers redisdeadrideblue 04-08-2010, 10:41 AM the stock settings are not as important as the settings that are right for you....:fact tfs32 04-08-2010, 10:42 AM the stock settings are not as important as the settings that are right for you....:fact :stupic DanQ 04-08-2010, 10:55 AM the stock settings are not as important as the settings that are right for you....:fact :stupic :werd daft 04-08-2010, 04:21 PM tfs, sweet man. needed the manual. now i can finish putting this bike back together the way it's supposed to be. T-1 04-08-2010, 04:22 PM :popcorn: daft 04-08-2010, 04:26 PM damn. manual doesn't actually have the information. previous owner lowered the bike and it looks like he adjusted the position of the forks within the triple clamps to compensate for the amount of rake with the rear lowering links. (yes, he raised the forks up through the triple clamp) anyone have the stock config to let me know what their settings are? CosmoK 04-08-2010, 06:35 PM Stock is about 1/2 inch of fork tune showing, or roughly 2 lines. | ||