09-11-2007, 02:18 PM
my turn signal light is staying on and some times it flashes on and off and my blinker light on the left front is out which is why im guessing its staying on right? how to change it? also if the blinker light is staying on but if you hit a hard bump or something it will flash or go off then come back on a few mins later then to me that would be a short in the wiring?
09-13-2007, 03:26 PM
The way you decribe it it seems as if you have a short, where not sure. To find it hook up your multi-meter to the frame and the other end to each individual wire going into the signal, if nothing the go to the fuse box and test the wires from there to the signal checking each for continuity.......
09-13-2007, 04:45 PM
having one of your lights out usually make the blinker on the same side blink faster seeing that it is under a smaller load rather than staying on
09-13-2007, 08:37 PM
so what would make it come on and stay on? a short?
09-14-2007, 07:47 AM
possibly, maybe a poorly connected capacitor? not entirely sure
09-14-2007, 07:52 AM
Most turn signal relays are amp driven, and if ther isn't enough draw on it it will stay on, and if the is too much it will blink really fast. Replace your bulb, and problem solved.
09-14-2007, 11:38 PM
to change the bulb there should be screw to remove on the bottom. this will help seperate the housing from the glass piece. THen simply remove the bulb , replace with a new one and close.
09-15-2007, 11:09 AM
i changed it and it wouldnt light it? i think theres some corrosin on the conections because i could never get it to light up the bulb but i touhed it with a srew driver and it sparked what should i do?