Uknowmehfo
11-01-2007, 08:28 PM
http://i85.photobucket.com/albums/k56/uknowmehfo/bike/IMG_0588.jpg
how do i take the logo off... i guess this is stock logo.... has been on there sence 03.... so it has some life on the plastic.... how can i get them off without scratching the plastic? i tried with finger nail asked the wife.... nope.....
Dream_Dreas
11-01-2007, 08:29 PM
Ride the motorcycle for a while, the plastics will heat up, then try to peal the decals off.. if that doesn't work, try a blow dryer.
Warning: Taking the decals off takes TIME and PATIENCE, so I would think long and hard before you start. :fact
InterSpool
11-01-2007, 08:31 PM
What's wrong with goof off? Or will that just eat the plastic?
BeNtLy831
11-01-2007, 08:34 PM
Goof off will eat up the plastics.
Just get a blow dryer and heat it up and they should come nice and smooth.
Uknowmehfo
11-01-2007, 08:36 PM
jacking the wifes blow dryer in the morning >:P
kyle-r6
11-01-2007, 08:45 PM
i think you should leave the logo on there.
Paytheon
11-01-2007, 08:46 PM
Yup, blow dryer is the way I think I would go. But why do you want the R6 gone? You plan on placing GSXR on there or something?:eek:
Uknowmehfo
11-01-2007, 08:51 PM
nah... i have a 05 busa.... with alot of mods....
just looks clean without anything on it..... just a clean black and red bike....
kyle-r6
11-01-2007, 09:03 PM
you should get some new turn signals too. the integrated turn signal/headlight mod would look really clean.
hai.pham
11-01-2007, 09:23 PM
use a blow dryer, and if there is still sticky stuff left over, use nail polish remover to remove the rest of it
Paytheon
11-02-2007, 08:29 AM
heat gun and goo gone
I think goo gone will damage the plastics. No?
dmagiccherry
11-02-2007, 08:40 AM
heat gun and goo gone
I've done the heat gun and goo gone thing, works great! Just wash with spot with soap and water when you're done and apply a small amount of wax to be safe and you're golden.
Br&new
11-02-2007, 09:23 AM
i use a hair dryer and wd-40 for everything.
nstyr6
11-02-2007, 10:54 AM
i used goof off on my plastics to get the nsty glue off after the decals ... its fine it doesnt hurt the plastics
Cheezer
11-02-2007, 01:08 PM
i used goo gone on mine and it worked really well. no worries
roki530i
11-02-2007, 04:08 PM
forget the decals you got a bigger problem looks like some criminal got away with murder he stretched out your swingarm over night probably! id fix that asap!
devin21
11-04-2007, 08:36 PM
yeah i agree take the stickers off. a blow dryer will work fine but if you are left with that sicky stuff still on the plastic go to the hardware store and pick up some GOO GONE it wont wreck the plastics and take the sticky stuff off easy