Ok so i removed that fuggly lookin rear fender and relocated my plate. Now what do i do about the hole near the rear tail light??? is their a special block plate adapter for this?? what brand and where can i get it thanks guys

Someone makes a color-matching plug for that hole, but I can't remember off the top of my head who it is. If you search the forum for fender eliminator kits, you might figure it out. If I can find it i'll let you know!

I have competition werkes limited, its not color matched but will be this weekend. But it plugs the hole

Here is a link to the one I was thinking of - its made by Greggs. Is this what you were looking for?

http://www.gcshopping.com/catalog/product_info.php?cPath=25_53&products_id=103&osCsid=080a9cd7047fc2b9b89850da720222de

Here is a link to the one I was thinking of - its made by Greggs. Is this what you were looking for?

http://www.gcshopping.com/catalog/product_info.php?cPath=25_53&products_id=103&osCsid=080a9cd7047fc2b9b89850da720222de

thats the part, thanks alot BMc... and by the way how do the bmc's react on my bike?? im thinking of getting them

If you buy a greggs fender eliminator, it comes with that plate. That's if you like the fender eliminator location. Check my bike pic out to see what it looks like. Link in my sig pic.

Would this fit 2008?

I have the Greggse that was posted above, it is colr matched and fits the bike perfectly... It's on the pricey side but well worth it.

Would this fit 2008?


I test fitted this on my bike (2008) and it did not fit flush, so i guess 08 is slightly different...I emailed greggs customs about this and he said he had no idea, and that if he makes one for the 08 its not gunna be anytime soon

There is a shop down here called metric method whos is making there own fender plugs, same as the greggs but designed for the 08' bikes...

i let them use my bike as a test dummy for fitment and design, the sample product should be out pretty soon for me to go back and let them do fitment testing...If all is good than they will have the cnc guy put them in production and get them into anodizing for the 08 R6's

i hope they hurry, because i have that ugly hole in my fender too

I made this bracket myself cost me about 4 bucks with everything. it consists of 4 L brackets and some bolts with lock nuts. Its great for any angle u desire
http://i22.photobucket.com/albums/b328/jdmek9typefast/plate.jpg

also check tobefast.com if you want color matched ones. i've ordered from them a few times great customer service and they ship things fast