So I've put my bike through complete hell the past couple years after shows, comps, practice the list can go on lol A few months ago before the season was over I ended up riding my bike over to a scrap metal company and weighed my bike. Full fluid and 2 gallons of gas it was sitting at 448 pounds!!!! Decided this winter build I'm going to try and shave around 50 pounds off this beast, and make it just a better all around bike. here she is
List of mods and parts soon to be.....
Half tubular chromoly frame(make bike more rigid, less flex is better!)
05 race tail/08 r6r front race plastics
8 cell battery
aftermarket wheels with ceramic bearings
titanium full exhaust
smaller front sprocket and smaller rear
vortex adjustable rearsets
all new GALFER Lines, rotors, and pads
new fresh 08 r6r forks redone by RACETECH
just got my new cage from ATOWNCUSTOMS.COM(for all your stunt part needs) lolol
paint and bondo from recent paint jobs on tank will be set all the way back to the metal to get rid of the weight of the 6 layers of paint!
race harness
ignition removal
power commander
maybe a few titanium parts here and there lol
engine will be getting,
head decked
adjustable cam sprockets
port and polish
maybe 2mm over to 636
all ceramic internal bearings
ignition advancer
might be missing more but I will be posting review pics on here as much as I can. INDYRPM.COM will be doing a rebuild review on thier site as well as mine when it finishes getting set up(SOON!!!)! I'll keep you all posted!!!!!:YEA
List of mods and parts soon to be.....
Half tubular chromoly frame(make bike more rigid, less flex is better!)
05 race tail/08 r6r front race plastics
8 cell battery
aftermarket wheels with ceramic bearings
titanium full exhaust
smaller front sprocket and smaller rear
vortex adjustable rearsets
all new GALFER Lines, rotors, and pads
new fresh 08 r6r forks redone by RACETECH
just got my new cage from ATOWNCUSTOMS.COM(for all your stunt part needs) lolol
paint and bondo from recent paint jobs on tank will be set all the way back to the metal to get rid of the weight of the 6 layers of paint!
race harness
ignition removal
power commander
maybe a few titanium parts here and there lol
engine will be getting,
head decked
adjustable cam sprockets
port and polish
maybe 2mm over to 636
all ceramic internal bearings
ignition advancer
might be missing more but I will be posting review pics on here as much as I can. INDYRPM.COM will be doing a rebuild review on thier site as well as mine when it finishes getting set up(SOON!!!)! I'll keep you all posted!!!!!:YEA