Yamaha R6 Forum: YZF-R6 Forums banner

FEELER (for now) 2005 R6 Raven PART OUT

3K views 17 replies 9 participants last post by  LouisR6Raven 
#1 · (Edited)
For now, this stands as a tentative feeler to gauge interest on the major parts. I have pics below of the initial tear down process. Read below for full description.

I won't be able to ship the parts till mid december, read down for description. Also, I'll be home for this coming Thanksgiving weekend from wednesday night to sunday, so anyone who'd like pictures of a specific part or for me to ship a smaller part just let me know before sunday

_____________________________________________________________

I totaled my baby a few months ago, and now I have some time to part it out. It’s time to spread the wealth around the forum haha

NOTE: If the larger parts are not marked sold, then I probably still have them. I’ll try to update this list as soon as something is SPF and/or sold.

***I’m still up at school for another couple weeks, but I wanted to start this now so that whoever claims the parts and sends over the payment gets them shipped right after I get home and get the parts off, rather than waiting an extra few days for payment to come in.

Payment: Because of paypal fees and the fact that I can only withdraw $500 per month from the account, I’d like check or cash mailed or the paypal payment sent as a gift.

Shipping: For the larger items, I’ll have to wait until I get home to get a shipping quote before payment so I can give you a fair figure. I’ll ship it via the least expensive safe method, or at the method of your choice. For smaller items I’ll ship USPS flat rate priority.

I’m open for local pickup as well for anyone close to the Los Angeles/SFV area. I go to school in Santa Barbara so I can also bring parts up there if anyone is near that area and wants to pick up locally.

I’ll try to name all of the parts but if I forget something small and it’s not on the list, I may still have it so just ask.

Prices are not including shipping

I’ll put up some pictures of the bike when it was in the shop so you can get a general idea, and once I’m home I’ll start taking more pictures of everything and adding them in. I also have pictures of the initial teardown process in my garage.

Exhaust (the dent and scuff are the only damage):
http://i1233.photobucket.com/albums/ff387/adrenalinejunkieR6/20121122_125512.jpg
http://i1233.photobucket.com/albums/ff387/adrenalinejunkieR6/20121122_125517.jpg

Windscreens and mirrors
http://i1233.photobucket.com/albums/ff387/adrenalinejunkieR6/20121122_125302.jpg

Passenger pegs
http://i1233.photobucket.com/albums/ff387/adrenalinejunkieR6/20121122_125442.jpg

Front Seat:
http://i1233.photobucket.com/albums/ff387/adrenalinejunkieR6/20121122_125618.jpg

Tank (white stuff is from the information sticker that came with it after I bought it back from the insurance company)
http://i1233.photobucket.com/albums/ff387/adrenalinejunkieR6/20121122_125552.jpg














I’m open to offers as well but no low ballers please I’m trying to recoup some of the cost of the bike.


First post with an I’ll take it claims the part

Parts are all off my 2005 Raven with 17,XXX miles:

-Frame: has a non-operation title so it can’t be on the street, but it’s 100% straight and would be perfect for a track or stunt project bike- $1000

-Motor- the mechanic said cylinder 2 wasn’t firing, but I’m not sure because he wanted me to sell the whole bike to him for dirt cheap and might have been trying to downplay the condition. It still runs and I didn’t notice any loss in performance- $800

-Complete wheels: Basically brand new BT-016’s put on a week before the lowside, 120 front and 180 rear. The rims are straight with no dents or scratches. Rotors are straight as well- $450 for both

- Front and rear axles- $15 each

-Spacers- $10 each wheel

-Driven power up chain kit- Gold 530 weight chain with back 15t front and 50t rear sprockets (-1/+2). Chain still in great condition with no stretching. Sprocket teeth are not eaten away at all from what I can see and the chain was lubed between every 400-500 miles- $100

-Yoshimura RS-3 carbon fiber exhaust- dent in the mid pipe and smaller scratch/scuff on bottom of the can. The rest of the can is still in great condition- $200

-OEM headers- $100

-Tank-no dents that I saw. White scuff that may be able to be wiped off but I haven’t tried. Also missing the right side Yamaha sticker- $150 SPF

-Headlight assembly with stock bulbs (you’ll need to get new dust covers for ~$5 because they’re cut for HID’s)- $250

-Front seat- Great condition with no rips or tears. Only slightly sun faded- $60

-Rear seat- Also no rips or tears. One mark on the rear from something sitting on it but not too noticeable- $50

-Rear seat cowl- no brand but has a silver Yamaha logo at the rear tip. Great condition and fits pretty flush- $40

- Subframe- the mechanic told me it was bent but I can’t be 100% sure for the same reason as the motor- $100

-Subframe tray- $15 SPF

-Gauge cluster with 17,XXX miles- has an intermittent occurrence only on first startup of the day where the needle will twitch and/or won’t make the full revolution but still perfectly functional- $100

-Forks- mechanic said they were slightly bent but I can’t be sure for the same reason as the motor and subframe- $100

-Power commander PCIII with original box, cable, software, instructions, decals, etc. Has a map for a graves exhaust and an aftermarket air filter- $200

-SpeedoDRD- $60
-Dark smoke windscreen- $25 SPF
-Clear windscreen (the holes are not threaded)- $20
-Nose fairing with scuff on the right side with fasteners- $40
-Right mid with small scratch on the top with fasteners - $40
-Right lower with scuffs/scratches behind the hole for the cover with fasteners - $25
-Left mid in perfect condition with fasteners - $50
-Left lower with small scratches with fasteners - $40
-Y bracket for lower fairings- $5 or will include if you purchase both lowers
-Tail fairing- crack on the right side and on the rear- $40
-Undertail- crack on the bottom- $40
-I also have another undertail that I bought before that I didn’t know was cut for a 12’o clock bar- $25
-Brake light- $30
-Fender eliminator- $20
-Aftermarket bright rear blinkers- $20
-Smaller low profile front turn signals- $20
-Horn- $40
-K&N air filter- $50
-Airbox with hoses- $60
-Ram air tubes- $65
EDIT: -Shorai battery- no leaks and the bike started right up in the shop. Was drained after sitting for a month, but I put it on the tender and it started up- $50
-Front brake calipers- brakes have plenty of life left- $30 each, $50 for the set, $70 with stock brake lines
-OEM front brake lines- SOLD
-Rear brake caliper with brakes- $30, $50 with rear OEM brake line
-Rear OEM brake line- $20
-Front master cylinder no reservoir- $65 SPF
-Rear master cylinder and reservoir- $50
-Triple tree- $150
-Right and left stock clipons- $40 each
-Right and left bar switches- $30 each
-Driven gel grips in great condition- $10
-Clutch perch- $25
-Regulator/rectifier- $100
-Ignition with original key, euro key, and gas cap (painted black)- $120
-Throttle bodies- $90
-Wiring harness- $50
-Radiator- $100
-ECU- $90
-Coils- $50
-Fuel pump- $80
-Swingarm- $80
-Rear sets painted black- $40 each, $70 for both
-Rear passenger pegs painted black- $25 each, $40 for both
-Kickstand with switch- $40
-Shogun swingarm spools- $25 SPF
-Left Shogun frame slider- $15 SPF
-Shogun bar ends- $20 SPF
-Stator cover- $40
-Stator- $80
-Rear shock- $100
-Clutch assembly with basket, springs, plates, etc- $200
-Clutch cover-$40
-Clutch cable- $15
-Stock levers- $15 each
-Shorty adjustable levers- faded from the sun but perfectly functional- $35 for the set SPF
-Mirrors- small scuffs on the ends- $30 each
-Front sprocket cover- $15
-Fuel lines- $50
-Axle adjusters- $25
-Fairing stay- $50
-Rear tire hugger- $60
-Coolant overflow reservoir with tubes and cover- $40
-Front fender- $60

Thanks for looking and feel free to email me at 05r6partout@gmail.com because my PM box will get full too quickly :cheers
 
See less See more
6
#6 ·
Yes it is! PM or email me and we can figure it out

Everything shogun, I'd like

A friend might want the tank. I can pick it up next month around.Christmas time, ill be down in brea/long beach area.
You got it. The right slider is done but everything else is structurally sound.

TheLazyOne has first dibs on the tank but if he passes you're next!

Send me a PM and we can figure out the shogun stuff

Can you post a pic of the rear cowl
I can send you a pic of the cowl tomorrow or Thursday if that works for you. I'll be home for the weekend so that works out

In for parts. Pm yo ass with my digits. No ****!!!!
:lmao got it man i'll text you!
 
#5 ·
In for parts. Pm yo ass with my digits. No ****!!!!
 
#8 ·
Replied!
 
#10 ·
Just replied
 
#11 ·
2005 R6 Raven PART OUT

Bump. Home for the weekend so I can get some parts out or pictures of anything if anyone wants
 
#12 ·
Just updated the first post with some more pics!
 
#14 ·
Replied!
 
#15 ·
Fairings are now available
 
#18 ·
All pm's replied
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top