Yamaha R6 Forum: YZF-R6 Forums banner

Fork conversion?v 05gsxr 600 to 01 R6.

1K views 10 replies 7 participants last post by  Thecca 
#1 ·
My friend is offering his forks from his gsxr600, he was in a crash and insurance is coming to get the bike.

My bike is down for repairs, a 2001 R6.

He has 50mm inverted, I have 43mm stupid ugly regular kind.(43mm is stock right)

IF this is possible, it would be very easy to take anything from his bike, so any parts (upper\lower triple tree, ect...) from his bike is no problem.

The catch is we have 3 days to swap before insurance comes and values\tows the bike... As in put my front end on HIS bike! luckly because he crashed it it does not have to be perfect.:flex:.

Ive searched alllll around, maybe somebody has some knowledge on this, empower me!
 
#3 ·
Yamaha forks on a Yamaha, your bike will never run again if you put zuki parts on it......
 
#4 ·
it does sound like alot of trouble, but it sure would look nice. ohh maybe the whole front end with brakes, and the engine! ok im getting carried away.
 
#8 ·
I don't think I've ever seen anyone do this. Not saying it couldn't be done, but there is WAY more to think about then just swap out front ends.

Rake of GSXR, rake of R6 for example, is the geometry the same? Would you have to have the stems swapped from the lower tripples (more than likely, R1 fork swap requires it). You would have to use the entire GSXR front end including brakes and wheel. Definitely not something that can be done in 3 days without knowing what you are getting into.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top