Yamaha R6 Forum: YZF-R6 Forums banner

04 R6s Part Out

3K views 22 replies 14 participants last post by  sjsy 
#1 · (Edited)
Parting my 04 Limited Edition. Parts are weathered but can be used for track day spares. Or clean and repaint??

Prices (To start):

Fuel Tank - $150
Upper Tree - $25
Front Seat - $20
Rear brake assembly (peg cut) - $40
L&R Rubber intakes - $20
ECU - $75
Voltage Regulator - $30
Right Clip On (no barend) - $20


Kickstand - SOLD to infared067
Rear wheel w/tire - SOLD
Left control switch - SOLD
Right control switch - SOLD
Rear Shock with Links - SOLD to jimbojones
Rear Tail - SOLD to 09r6sVA
Under Tail - SOLD to 09r6sVA
Subframe - SOLD to 09r6sVA
Rear Seat - SOLD to Manny333
Fairing Stay - SOLD to kenroe
Left Clip On (no barend)- SOLD to kenroe

Let me know what you need as I update the list with prices. Will consider reasonable offers . . . you pay for shipping. Paypal preferred.



 
See less See more
2
#5 · (Edited)
It's a stick-on and not carbon fiber. I think it'll be messed up taking it off. It'll have to go with the sale of the upper tree.

Got fairing bolts? What's up with the mid pipe with no exhaust?
I can't sell the bolts, as they are not 100% complete. I bought the bike as is without the pipe. It's wrapped at the headers so I don't know if this is a full aftermarket system. Although I think it was an FMF pipe.

how much for the rear tire? just the tire shipped to eureka ca 95501
thanks
Honestly, I would have to ask for about $75 shipped to make a little money. After all, I would have to ship it from Hawaii. You're better off buying a used tire locally, imho.



I am slowly taking the bike apart so I can have prices up. Sorry for the latency fellas.
 
#3 ·
Got fairing bolts? What's up with the mid pipe with no exhaust?
 
#7 ·
I was planning on selling the tank with the rest of the fairings but how does $275 shipped sound to you. I'll throw in the exhaust extension if it can be of use to you. Tank has a couple of dime size dings on the left side (I'll take a few pics later). I looked on ebay and found one that is in similar condition so I used their price as a baseline.

Tank will come with the fuel pump as well. I don't have the key so you'd have to use the latch assembly from your tank.
 
#12 · (Edited)
I do. PM me an email address so I can send you some pics.

Not to bash on you but is it just me or the ignition look a little tampered with? Usually theres a little sleeve like piece that comes up to cover it.
No worries. I knew sooner or later someone was going to ask. So here is my story:

I layed down my 07 and sustained front end damage (can you see the forks in the 2nd picture?). Calculating the costs to repair it, I came across this parts bike and bought it knowing it will be cheaper using parts from it. The owner before me was not able to get a title transfer from a guy who got deployed (longer story). I called the local Police department with the VIN (not scratched off which is indicative of a stolen bike) and confirmed it was NOT stolen. Had it been scratched off, I would have easily walked away.

So I go pick up the bike (lifted truck and no trailer) only to arrive finding out that there were no keys for the bike and handlebars/ignition are locked. Our challenge was to figure out how we were going to get the bike on the truck with the handle bars turned in the "locked" position going up the 12" wide ramp. I had two choices, try to kick the handlebars and hope the pin breaks, or see if I can just shove a screwdriver in there and turn it. Both not the smartest way but it had to be done. In the end and to no avail, we had two other guys (neighbors) just helped us lift it on to the truck bed. Getting it down and off the truck was the easy part.

Needless to say, the ignition module is not for sale and hence, selling it as a parts bike.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top