Yamaha R6 Forum: YZF-R6 Forums banner

number plates

4K views 25 replies 15 participants last post by  Tdub 
#1 ·
Who makes number plates that goes on the windscreen? I was looking at drippin wet but 50 bucks for number plates seems pricey....wondering was there any other options out there. Precut wise.
 
#5 ·
just paint the darn thing.. $5 for a can of white paint and pinstripe a black border across the top to match the upper fairing areas that are painted.
 
#8 · (Edited)
ah.. yeller paint it is then :)

:rolleyes: some of us aren't cool enough/don't want white plates :laugh
if you saw some of the shenanigans going on in the MW am races this past weekend at Homestead-Miami speedway, you wouldn't walk to the official garage to bump yourself to expert.. you would RUN .. LOL
 
#14 ·
I def need to get in touch with Nick for number plates and some BAUCE bling...
 
#15 ·
Too bad my trackside vendor is only local..... they'll do all numbers (1 front, 2 tail) for $20
 
#17 ·
i can see using vinyl backgrounds for your stock bodywork (maybe) , and if you are using the same bike with different riders needing the same bike..to switch back and forth.. but painted backgrounds are the way to go with race bodywork i would think. Perhaps the vinyl gets ya by on the weekends before you paint the bodywork? I mean if your painter is gonna do the bw, he can easily do the yellow or white background when he shoots. :) will always look nicer than wavy bubbly vinyl . Totally agree that the vinyl gets ya by in a pinch though.

OR just go to your trackside vendor and get a roll of racer tape in the color ya need. Will cost like $7 and you will have a bunch of ducttape left over. (racer tape isn't as nasty sticky as actual AC duct tape). There is nothing that can't be fixed with zip ties and duct tape! :) Racertape backgrounds would be a step lower in the "bling" department from vinyl, just throwing out options..
 
#22 ·
paint one of the front corners where the headlights would be white.... then get vinyl stickers made?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top