Yamaha R6 Forum: YZF-R6 Forums banner

Agg Racing smog block offs - $22.95 shipped

113K views 1K replies 208 participants last post by  Derek Polkamp 
#1 · (Edited)
edit: they're $22.95 shipped, and they will come with a cap for your airbox as well as a ziptie to insure the cap is secure on the airbox plug, or to be used to keep the power harness out of the way of the fans once the pump is removed.

alright... i'm now producing my own block off plates b/c i knew even at $35 shipped, it was a bit too much, and $45 was FOR SURE too much. they'll fit these bike: R1 (2004-13), R6 (2003-13), R6S (2006-13), FZ1 (all), FZ6 (all), Kawasaki ZX6RR (2003-08) ZX10R, ZX12 (2004-08) ZX14R (all). if you're bike's not on the list, they probably won't fit your bike, but ask me anyways, and i'll do a little design research and find out.

they're CNC machined at a shop around the corner from me, and i will usually get orders of 23 sets at a time (just the number that they can get out of a single order of aluminum. if i'm out, and you order, it may be a few days before i can get to the shop to place the order, so please have patience - i'm just a regular guy trying to help other guys get good parts at good prices. :fact

to install these, you just take off your old ones - there are plenty of "how to's" on this board as well as others to help you get the AIS pump and hoses off (jason D did a pretty good one... might wanna PM him about it). save the stock bolts, and remove all the crap from the stock gaskets (flaps, grates, screws, etc). put the gaskets back on, and then bolt these plates onto the top of the motor. voila... you're done.

so just follow the link below and change the quantity to however many you want (1 is ONE SET, so TWO plates).



...and here is one of just the gasket before they're installed:




there are only pro's to doing this mod... and zero con's:

  • decreases decel popping
  • gives you the ability to more accurately tune your bike (whether with auto tune or on a dyno)
  • decreased weight
  • everybody's doing it :hehe

use the link below - be sure to specify whether it's domestic or international shipping. thanks y'all!

http://aggracing.com/store/index.php?route=product/product&product_id=51

bluerebel (on this forum) did a GREAT how-to write up on the installation of these plates. his thread can be found HERE.
 
See less See more
2
#828 ·
Re: Agg Racing smog block offs - $23.95 shipped

no-downside mod right here. a "must have" for anyone looking at doing a pc3/pc5/bazzaz/ecu flash. :fact still got plenty in stock for now... they will start flying off the "shelves" very soon for the winter rebuilds/upgrades/track-outs. :fact
 
#832 ·
Re: Agg Racing smog block offs - $23.95 shipped

I'll take a set.
 
#834 ·
Re: Agg Racing smog block offs - $23.95 shipped

i have 5 sets left in this batch... then we'll have to wait on the shop to get me the next 125 sets. :| i MIGHT try and use the old shop in the meantime but they won't have the fancy logo on em.

if you want a set, get a set now. OR, know that if you wait patiently, i'll do a promotion once they're here. something like an extra dollar or so off for a week. idk... we'll see.
 
#839 ·
Re: Agg Racing smog block offs - $23.95 shipped

these are legit!
 
#842 ·
Re: Agg Racing smog block offs - $23.95 shipped

OH MAN, sorry to say, but the "nice logo" ones are in production again and will be to me in about 1-2 weeks from now. if you can wait, i'll update this thread once they're ready to go. if you'd rather not wait, i can probably get my hands on version 1 (with the plain etched "agg racing" text, no logo ones). let me know.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top