Just wanted to share some pictures of the temporary cowl wrap I did on my R6.
The lighting in my parking garage is poor so they won't turn out very well, so I won't have proper pictures until the spring.
Pictures:
-Picked up a used cowl from dubhugger here on the forums
-Pics comparing the seat to the cowl
-Pic of my bike and the difference in color between my bike and the cowl
-Pics of the wrapped cowl and under side of the wrap before it was trimmed.
I'm letting it cure for a couple days before I trim it properly so that if it shrinks or stretches it will have enough material to do so.
This is a very tricky wrap, it took me 3 tries and finally was able to complete the wrap.
First try I didn't take my time and rushed it and didn't take care of all the wrinkles, and the second try I broke through the vinyl with my squeegee.
The lighting in my parking garage is poor so they won't turn out very well, so I won't have proper pictures until the spring.
Pictures:
-Picked up a used cowl from dubhugger here on the forums
-Pics comparing the seat to the cowl
-Pic of my bike and the difference in color between my bike and the cowl
-Pics of the wrapped cowl and under side of the wrap before it was trimmed.
I'm letting it cure for a couple days before I trim it properly so that if it shrinks or stretches it will have enough material to do so.
This is a very tricky wrap, it took me 3 tries and finally was able to complete the wrap.
First try I didn't take my time and rushed it and didn't take care of all the wrinkles, and the second try I broke through the vinyl with my squeegee.