2008 R6 "butt plug"

[Jaguilar513700]

Originally Posted by QR6r

Pretty sure it's this one. Very expensive! Shipping is like 50 bucks! I want one bad, but not for that price.

http://www.moto-works.jp/bikes/06_07yzf_r6.html

Thanks! Man thats too expensive imao

[JoshYamR6]

Originally Posted by ErikTaylor

Got my ass plug installed. There were only 2 hiccups. Firstly, the screws weren't long enough. I had to go to Lowes and by the M5x8x20 screws to get enough reach. Secondly, by installing this I discovered my subframe is cracked under the rear seat from my low side I had recently. Other than that, she installed beautifully and I think it's awesome. I love the way my plate is further back now. All in all I'm very happy. TST shipped quick and is made very nicely. Here are some pics.

Hey Erik are you using any type of fender eliminator to mount your plate? Or did u just bend the edge and use bolts or something? Thanks


Sent from my Motorcycle iPhone app

[verybigtiter6]

hey tst industries, interested in ur ass plug product but was wondering if its gonna come with longer screws? mine is a 09 r6 so im probably gonna have the same problem as joshyamr6. longer screws like M5x8x20

[Darthteddy]

On Sale Over at Hustler. . .

[TST Industries]

Originally Posted by verybigtiter6

hey tst industries, interested in ur ass plug product but was wondering if its gonna come with longer screws? mine is a 09 r6 so im probably gonna have the same problem as joshyamr6. longer screws like M5x8x20

Yea we have the correct screws nowadays. We didnt have all the tail parts during R&D so me missws the extra length all the screws ahould be. We have since corrected the issue and send all the correct hardware with the kits.

[ErikTaylor]

Originally Posted by JoshYamR6

Hey Erik are you using any type of fender eliminator to mount your plate? Or did u just bend the edge and use bolts or something? Thanks


Sent from my Motorcycle iPhone app

Hey bud, yes I did not use any bracket. Just take the plastic rivets that hold the front of the bottom tailpiece in, run to a hardware store and buy a bolt/nut combo of your choice. Then secure the plate where those two rivets used to be with the hardware you just bought, then bend the plate.

MAKE SURE YOUR PLATE IS VISIBLE FROM 25 feet away.


Sent from my iPhone using Motorcycle.com Free App

[TST Industries]

Or you can get the TST Industries bracket that goes in that location and does not require that you bend the license plate

http://tstindustries.com/product.php...cat=277&page=1


http://www.tstindustries.com