» Site Navigation
»
»
»» Motorcycle Forums
#11
My R6 eats me.
Join Date: Nov 2012
Posts: 20
Re: Suggestions?
Uh, I have a 2012 Yamaha R6, not a R63
Sponsored Links
Advertisement
#12
Two Bro's=ORGASM *nohomo*
Join Date: Mar 2009
Location: Whitby, Ontario, Kanada
Posts: 3,091
Bike: 07 R1
Re: Suggestions?
Quote:
Originally Posted by
FatR6Rider
Uh, I have a 2012 Yamaha R6, not a R63
From 2006 to 2013 all R6 have a "mid muffler", so any slipon you get won't be loud, even a straight pipe
That video is of a 2003 R6, the 2003 to 2005 and any year R6S have no mid muffler, so when you put a slip-on on them, they are nice and loud
If I was you, I would do
THIS and
THIS .
Or, if you wanted to get extra fancy and go with a full system, can't beat this deal:
http://www.biohazardcycles.com/servl...EXHAUST/Detail
After you do either of those setups, make sure to send your ECU to OhioYJ so he can flash in a proper fuel map for free, so you'd never need a power commander
-Jamie M.
__________________
07 R1 -
Flash tune 'd,
A&R Race Baffles with Akrapovic Y Pipe (
wrapped in DEI Titanium header wrap ),
Renthal MX Kevlar Grips, HVMP Extra Heavy Weight bar ends, Saddlemen "Tech" seat (memory foam + gel), Skeen Racing Extended White frame sliders, Shermoto Levers, Proton flush mount front signals , BMC race filter,
Elka Stage 4 adjustable shock ,
iPod 4th Gen with Harry's Lap Timer Pro with Emprum UltiMate 5hz GPS and Ram mount, 190/55
Bridgestone S20 's,
Garmin 2595LM GPS in RAM stem mount,
MikeyMoto Ultralight rear rotor , Ultra
high power LED running lights , trimmed
ebay fender eliminator , Shorai LFX14A4-BS12 ultralight battery, Fren Tubo Type 4 CF lines (front and rear), Vesrah RJL front pads, Ferodo Sinter Grip ST rear pads, Amsoil MCF full synthetic oil, Amsoil EA15K13 car oil filter, Wurth HHS2000 chain lube, Shell 91 octane NO ETHANOL fuel ONLY.
Coming soon: Race Tech fork kit, EK MVXZ 520 chain, Drive Systems USA Superlite Steel rear sprocket (+2/47t), Driven drilled steel front sprocket (-1/16t), will try to reach top speed of 305kph/190mph.
#13
My R6 eats me.
Join Date: Nov 2012
Posts: 20
Re: Suggestions?
Shame that that isnt all in my price range, I was looking to spend 100-mid 200s, but from what I can tell, to make my bike sound bad ass, it'd cost more then that huh =/
#14
Two Bro's=ORGASM *nohomo*
Join Date: Mar 2009
Location: Whitby, Ontario, Kanada
Posts: 3,091
Bike: 07 R1
Re: Suggestions?
Quote:
Originally Posted by
FatR6Rider
Shame that that isnt all in my price range, I was looking to spend 100-mid 200s, but from what I can tell, to make my bike sound bad ass, it'd cost more then that huh =/
Yeah, maybe you can try and find a set of 2003-2005 R6 headers or any year R6S headers cheap, and mod up your stock exhaust to them. It'll be loud and raspy, not exactly the sound I look for, but if you're looking for loud, that'll get er done.
Stock muffler with 2003 R6 headers:
-Jamie M.
__________________
07 R1 -
Flash tune 'd,
A&R Race Baffles with Akrapovic Y Pipe (
wrapped in DEI Titanium header wrap ),
Renthal MX Kevlar Grips, HVMP Extra Heavy Weight bar ends, Saddlemen "Tech" seat (memory foam + gel), Skeen Racing Extended White frame sliders, Shermoto Levers, Proton flush mount front signals , BMC race filter,
Elka Stage 4 adjustable shock ,
iPod 4th Gen with Harry's Lap Timer Pro with Emprum UltiMate 5hz GPS and Ram mount, 190/55
Bridgestone S20 's,
Garmin 2595LM GPS in RAM stem mount,
MikeyMoto Ultralight rear rotor , Ultra
high power LED running lights , trimmed
ebay fender eliminator , Shorai LFX14A4-BS12 ultralight battery, Fren Tubo Type 4 CF lines (front and rear), Vesrah RJL front pads, Ferodo Sinter Grip ST rear pads, Amsoil MCF full synthetic oil, Amsoil EA15K13 car oil filter, Wurth HHS2000 chain lube, Shell 91 octane NO ETHANOL fuel ONLY.
Coming soon: Race Tech fork kit, EK MVXZ 520 chain, Drive Systems USA Superlite Steel rear sprocket (+2/47t), Driven drilled steel front sprocket (-1/16t), will try to reach top speed of 305kph/190mph.
#15
My R6 eats me.
Join Date: Nov 2012
Posts: 20
Re: Suggestions?
See I'd do all that if I know little to anything about bikes lmao. Last thing I want to do is **** it all up and then im stick with a bigger bill to repair it all :p Like I said, if anything I'm going to start talking to my friends at work more about exhausts and see if they know anything about it.
Sponsored Links Advertisement
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes
Linear Mode
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
Linear Mode
