I'm gonna throw out there that when you guys say 'oxygen' you're actually referring to 'atmosphere'. Oxygen is flammable...I wouldn't be putting that in my tires...rolling around on squishy bombs.
I guess I don't really get it, though. I mean, atmo is already over 70% nitrogen anyway (~20% oxygen / ~10% 'other' [rounded figures]) so what discernable advantage would there be to simply completing the 'missing' 30% of nitrogen from the atmosphere? IMO, the greatest advantage would be that nitrogen from a static-cleaned tank is dry, and dry is good. Atmosphere has moisture, and depending on the %RH when you decide to fill your compressor tank and pump it into your tire you'll get varying degrees of moisture in there, and wet is bad.
__________________ 2005 R6, Motodynamic Sequential Signals, Flush Smoke Front Turns, 6k Hid, Devil Racer Carbon Highmount Ceramic Coated Black, Ohlins Steering Dampener, Motovation No Cut Frame Sliders and Bar End Sliders, ASV Levers, Vortex Black Rearsets, K&N Air Filter, Factory Pro +4 Ignition Advancer, Superflare Vstacks, Graves Slide Stops, Graves Smog Block Offs, -1 520 Conversion with Driven Sprockets and DID Chain, Goodridge Shadow Brake Lines, Brembo CNC Calipers with Vesrah RJL Pads, Brembo 19x20 Master Cylinder, Zero Gravity Windscreen, Stompgrip Tank Pads, Gilles Chain adjusters with race lifters, NRC Powdercoated Racing Covers, HINSON SLIPPER CLUTCH, Vented Brakes Cooling System, Racetech Internals Front and Rear with Michelin Power Super Sports holding it to the road
What I wanna know is how you evacuate all of the "air" and replace it with nitrogen completely?
those places that sell "nitrogen" probably don't. and you end up with a mix of only about 85% nitrogen as opposed to regular "air", which is about 75% or so. they get to charge you for it, too, which is great for the tire companies.
stick with regular plain old "air" and remember to check your pressures...
...the 3 is silent
2009 yamaha r6
i give up...