Request for an 05 handlebar : Yamaha R6 : R6 Forum

BigShepp · 11-06-2012, 11:22 PM

So I have another interesting situation.

In a nutshell, I need to "borrow" a handlebar from the 05 bikes (not sure if a 03-04 or a R6S will work.) I need it for a design I'm working on for my bike and I can't use one of the ones for my bike as this is going to be a several week project and my bike is my daily driver.

The handlebar will be unharmed. I merely need it so that I can take some measurements from it.

I'll be more than happy to pay shipping for it, and I really only need one, but I'm not looking to buy one unless you're looking to unload a handlebar for pretty cheap.

Not sure if this is the right section for this, and I can't say a whole lot about the project on the forum, but there will be a full write up on the forum once it's done.

Sorry I'm being so vague. One of the professors on campus advised me that it was in my best interest.

BigShepp · 11-07-2012, 11:46 PM

Bump for a little help? I can offer a finished version of what I'm working on at cost to whoever helps out.

R-Silaxin · 11-07-2012, 11:57 PM

What exactly do you need? A stock clipon? I'd help you out but I don't have an R6 S type... Or my stock clipons. But I know a guys who do... Let me know what you need and I'll see what I can do.

BigShepp · 11-08-2012, 12:49 AM

Quote:

Originally Posted by R-Silaxin

What exactly do you need? A stock clipon? I'd help you out but I don't have an R6 S type... Or my stock clipons. But I know a guys who do... Let me know what you need and I'll see what I can do.

Yea, the stock clip-on. I don't need any of the hardware though.

Here's a part number:

5SL-26121-10-00 for the left
5SL-26122-10-00 for the right

Really I just need one. Once I get the design done I can mirror it.

R-Silaxin · 11-08-2012, 01:14 AM

Quote:

Originally Posted by BigShepp

Yea, the stock clip-on. I don't need any of the hardware though.

Here's a part number:

5SL-26121-10-00 for the left
5SL-26122-10-00 for the right

Really I just need one. Once I get the design done I can mirror it.

Sounds good... I'll see what I can do... Interested in what you're working on!

:

BigShepp · 11-08-2012, 02:56 PM

Quote:

Originally Posted by R-Silaxin

Sounds good... I'll see what I can do... Interested in what you're working on!

:

Nothing gigantic. It's pretty simple, but unique. I've not been able to find one I could buy, hence why I'm making one.

Sent from my iPhone using Motorcycle.com Free App

dexter6 · 11-09-2012, 01:37 AM

Apply for Gold Delta SkyMiles? Credit Card: Earn 30,000 Bonus Delta Miles when you spend $500 in the first three months. No annual fee for the first year, then $95.
Lancome Coupon Codes
Receive $500 Cash Back on a new 2012 CorollaReceive $500 Cash Back on a new 2012 Corolla

BigShepp · 11-17-2012, 03:03 AM

Any word Silaxin? I was hoping to get the part in before like Dec 14. That's when my Christmas break starts and I was planning on doing this during the break.

Sent from my iPhone using Motorcycle.com Free App