bike wont turn over after qem amd quick shifter install

[RJ1crazy]

just installed and wired up the qem and qs and now the bike just clicks and won't start over, its leaking gas from somewhere, its all over my exhaust pipes. I have the green and blue wires connected to the pcv and the other green and blue wires connected to the qs ... when the bike accessory is turned on the qem status light comes blue and pcv turns green. in the pcv I have the qs turned on and configured. I have no idea what's going on, the bike just clicks when I hit the starter

[MELK-MAN]

im wondering if you wired something up and the injectors are now being told to stay open, allowing fuel from the primed pump to pour fuel in, which in turn is hydrolocking the engine? that would explain the gas leaking from the exhaust if you didn't unhook the fuel lines or remove the fuel pump.. is the fuel IN the exhaust or just on it??