Im thinking about doing it before I throw my rebuilt engine back in. These tbis have had over 40,xxx miles on em lol Want to get in and clean up the injectors if its worth it. ANy insight or pics anyone???
I've ran sea foam throttle body cleaner thru my bike. Made it smoke like a bitch for a lil but didn't really notice a difference
__________________ mods: woodcraft clipons and frame sliiders, leo vince slip on, 05 header mod, pcv, agg smog block offs and sbk res kit, robby moto sbk rearsets, 520 -1+2 renthal.set up, bauce racing ecu flash, ebc hh pads, and some small cosmetic stuff.
__________________ mods: woodcraft clipons and frame sliiders, leo vince slip on, 05 header mod, pcv, agg smog block offs and sbk res kit, robby moto sbk rearsets, 520 -1+2 renthal.set up, bauce racing ecu flash, ebc hh pads, and some small cosmetic stuff.
It seemed like it cleaned some carbon build up off but that's it. As far as performance I noticed nothing.
__________________ mods: woodcraft clipons and frame sliiders, leo vince slip on, 05 header mod, pcv, agg smog block offs and sbk res kit, robby moto sbk rearsets, 520 -1+2 renthal.set up, bauce racing ecu flash, ebc hh pads, and some small cosmetic stuff.
I have cleaned my tbs, its not that hard at all if they are off the bike. As for the injectors, I would suggest finding a place to have them professionally cleaned and flow matched if you can. I got it done locally for $60, but after a couple of seasons of race gas, I didnt have much choice...
Had a fuel delivery problem or in other words RPM was hesitating and would not go over 4.5K......Cleaned every part i can get my hands on that had to do with Fuel in the bike
Throttle Bodies , Fuel Header , Gas tank , fuel Pump , Lower and upper Injectors , put everything back together and i couldn`t be happier.
Linear Mode
