I saw it. I'll hit you back up in a minute. I can't call for a few hours anyway.
Eric, if you need to borrow the forks for a bit or any parts, let me know.
No worries brutha... I'm just razzin ya a bit... I know you're living like two lives, crammed into one... I know you're hella busy... But just wanted to iron a couple things out... Hit me up whenever homes...
I saw it. I'll hit you back up in a minute. I can't call for a few hours anyway.
Eric, if you need to borrow the forks for a bit or any parts, let me know.
my main focus will be fixing the tank. im bringing it into work tomorrow to see what can be done. it looks like i may just need the lower triple tree. well see, ill get the bike on a head lift this weekend and pull it apart. its not a huge rush as i have some other financial priorities to take care of at the moment but i will hit another track day with you all before the season wraps up
as always though thanks for all the endless help with this man i really wouldnt be able to do it with out you and everyone else.
Hi guys, sorry to just jump in the middle here but I've aquired a '00 R6 that has been sitting too long and needs some love. Pulled carbs and no matter what I do the pilot jet is toast. Chem-dip, ultrasonic, still gunked up. So, looking at ordering some new ones and these are marked "FTC USA 40K". Any idea who made these jets? Not a biggie, just curious.
The bike has been modded a bit, M4 pipe, jet kit of some sort, K&N, safety wired to hell, track plastic, PIAA lights, ss braided lines, Penske rear, obviously some fork work, frame sliders, etc. I bought it for a song and have only barely verified it will run. Carbs are plugged, so I'll get that done and some fresh oil, then go from there.
I do love my FZ1 but wanted something I could take to the track and not worry about a scratch or ten. Interested in going to one of the area riding schools so I can learn to go faster the right way.
Hi guys, sorry to just jump in the middle here but I've aquired a '00 R6 that has been sitting too long and needs some love. Pulled carbs and no matter what I do the pilot jet is toast. Chem-dip, ultrasonic, still gunked up. So, looking at ordering some new ones and these are marked "FTC USA 40K". Any idea who made these jets? Not a biggie, just curious.
The bike has been modded a bit, M4 pipe, jet kit of some sort, K&N, safety wired to hell, track plastic, PIAA lights, ss braided lines, Penske rear, obviously some fork work, frame sliders, etc. I bought it for a song and have only barely verified it will run. Carbs are plugged, so I'll get that done and some fresh oil, then go from there.
I do love my FZ1 but wanted something I could take to the track and not worry about a scratch or ten. Interested in going to one of the area riding schools so I can learn to go faster the right way.
Thank in advance for any help or suggestions.
John
There may be some people selling used ones in good condition in the for sale section. Check it out
Hi guys, sorry to just jump in the middle here but I've aquired a '00 R6 that has been sitting too long and needs some love. Pulled carbs and no matter what I do the pilot jet is toast. Chem-dip, ultrasonic, still gunked up. So, looking at ordering some new ones and these are marked "FTC USA 40K". Any idea who made these jets? Not a biggie, just curious.
The bike has been modded a bit, M4 pipe, jet kit of some sort, K&N, safety wired to hell, track plastic, PIAA lights, ss braided lines, Penske rear, obviously some fork work, frame sliders, etc. I bought it for a song and have only barely verified it will run. Carbs are plugged, so I'll get that done and some fresh oil, then go from there.
I do love my FZ1 but wanted something I could take to the track and not worry about a scratch or ten. Interested in going to one of the area riding schools so I can learn to go faster the right way.
Thank in advance for any help or suggestions.
John
Sounds like it would be easier to get new pilot jets. I've ordered some jets from here before: http://www.jetsrus.com/
Quote:
Originally Posted by MaxxxEdge
for A-Man (will explain later)
Gonna snap a couple pics of the new forks that came in this weekend!!!
Quote:
Originally Posted by Rocky5000100
There may be some people selling used ones in good condition in the for sale section. Check it out
There was a guy named Jake's dad on here who had a whole heap of carbs and parts at one point.
Can't wait for the updates!
i really wouldnt be able to do it with out you and everyone else.
Linear Mode
