Wiring issue, and turn signals.

[J.F.Walker79]

I have an 02 R6, first off...when I bought it the guy said that he bought it without turn signals on the front, I bought turn signals for it, but the wires were no where to be found to plug them in. Anyone know what color wires I should be looking for, and perhaps where they begin? Also, without front turn signals, will it cause both of my rear lights to flash when hitting the turn signal switch? Another question, I just got my bike out of the shop from getting valves adjusted, plugs, carbs synced, etc etc. I get it back, and my Rpm gauges isnt work, it's very jumpy, it goes up to 4 k, then up to my actual rpms, then back to zero constantly, And my temperature gauge seems to be off quite a bit. Any help with this issue would be appreciated.

[toysareforboys]

I would pick up a new wiring harness if you want to be sure everything is and will work properly in the future.

If you want your rear signals to work properly without front signals connected pick up a digital flasher relay and you'll be set.

Good luck.

-Jamie M.