Exhaust Header Pipes

[toysareforboys]

Don't over torque the header nuts when you re-install it. From how bad that plate is bent, it appears someone did that to yours, probably what caused it to crack

-Jamie M.

[daniel9]

Hey everyone, sorry it took a while for the response. Two days ago, i changed out the exhaust to another OEM one. Sounds great, the welding couldn't be done, the whole headers were beyond rusted, and was falling apart

Thank you all for the help

[Miller'sR6]

Nice I bed your stoked to get the bike back together.

[Vineyney]

Originally Posted by daniel9

Hey everyone, sorry it took a while for the response. Two days ago, i changed out the exhaust to another OEM one. Sounds great, the welding couldn't be done, the whole headers were beyond rusted, and was falling apart

Thank you all for the help

What can is that on there?

[Sikor]

Hi, I have a question related to the topic.
I have an 2007 R6 and I'm wondering if any OEM header from older model (without cat and silencer box) would fit to it. I'd like to set up that kind of header with the OEM slip-on from my R6. Is it possible?
Or can I buy this kind of aftermarket race header for my model?

[bryan j]

Originally Posted by Sikor

Hi, I have a question related to the topic.
I have an 2007 R6 and I'm wondering if any OEM header from older model (without cat and silencer box) would fit to it. I'd like to set up that kind of header with the OEM slip-on from my R6. Is it possible?
Or can I buy this kind of aftermarket race header for my model?

Search 05 header mod. Deletes the cat and its cheap

[jaredtraceyr6]

Originally Posted by ridick_bowen

JB weld? Mighty Putty? Worth a shot, right.

too funny was reading the thread an was wondering when someone was gonna sugest jb weld

[LiveFastDieLast]

Originally Posted by jaredtraceyr6

too funny was reading the thread an was wondering when someone was gonna sugest jb weld

same...
Or the just cut the pipes off and run open headers...
good to see you sorted the problem... Time to twist the wrist.

[Sikor]

Originally Posted by bryan j

Search 05 header mod. Deletes the cat and its cheap

Thanks! I'll think about that.

[PainterNick08]

Ok this caught my eye and i looked into it and thats sweet my question is and i know its probably a dumb one because the 05 headers fit the 07 will this setup work on my 08? i am gettin a power camander 5 so not worried bout the tuning issue it will be solved, but will the 05 headers work for my 08, i do have the yoshi r-55 slip on and i want the cat box gone and i dont want to spend another 500 on the full yoshi system so this could save me alot of money, so can anyone tell me if this setup will work on my 08?