'07 - O2 sensor with PC ?
Hi guys, quick question.
I've got a track only '07 R6 w/ Power Commander, and full Graves exhaust. Currently there is an O2 sensor threaded into the exhaust. After removing the tank for some other work, i notice that it is unplugged.
Should it be unplugged with the Graves and proper PC setting ?
Also, i am putting the stock exhaust on temporarily for a trip to Laguna in a couple weeks. Should i run the O2 with the stock exhaust ? and what about the valve thingy in the muffler ? Leave that active or not ?
I was told by some Yamaha guys to leave the actuator unplugged so the valve stayed open, and just leave my PC setting the same as with the Graves system.