I am thinking of keeping my R6 at my flat's stairwell. But to do that, I will need to push it up one step (about 4" high) at the door and the width of the door is about 1m wide. Is this feasible?
Will I need a ramp? And can I do it via manually pushing/without riding?
Use a board for a ramp and push it up. Or if the ppl around you are cool ride it up
__________________ mods: woodcraft clipons and frame sliiders, leo vince slip on, 05 header mod, pcv, agg smog block offs and sbk res kit, robby moto sbk rearsets, 520 -1+2 renthal.set up, bauce racing ecu flash, ebc hh pads, and some small cosmetic stuff.
wait... so supposing the step will in no way touch/scrape the single step, is it even possible to push it up a step (about 4") manually without a board/ramp?
Haha and I doubt riding in is an option; since the ppl around seem to care a lot each time the main door slams.
Will I have enough clearance width wise?; the corridor is 1.1m. but the door is 1m.
__________________ mods: woodcraft clipons and frame sliiders, leo vince slip on, 05 header mod, pcv, agg smog block offs and sbk res kit, robby moto sbk rearsets, 520 -1+2 renthal.set up, bauce racing ecu flash, ebc hh pads, and some small cosmetic stuff.
Ride it up. If your neighbors have an issue with it ask them if they're going to pay for the bike if/when it gets stolen. Obviously be courteous as to when you do it.
I ride my bike into my house every time I get back home and am done riding for the day. Goes in the door way no problems and up the 2" sill with no issues
use some man hands and either lift the bitch up there push it up there or have someone help you.....its not going to break if you lift it off the ground and let it drop lol
__________________ 2009 Orange R6 MODS
- Shogun FS- Zero Gravity DB - Custom FE - Hot Bodies Flush Mounts - MotoDynamic Integrated Tail Light - Supersprox -1+2 - Taylormade Full Exhaust - PCV - OURY Grips - Corbin Seat - Ebay Shorty Levers
-Future Mods-
-Translogic MicroDash-Projectors-ASV Levers-GYTR Solo Seat- Bright Gold Carrozzeria Rims........ 2004 Nissan 350z MODS
Apex i N1 single exit exhaust, Nismo CAI, 2 12" Kenwwod subs, JVC AVX820, Alpine type r speakers, varrstoen +12