easbaysav's 09 Track Build : Yamaha R6 : R6 Forum

» Insurance
» Sponsors
» Yamaha YZF R6 Prices
Go Back   Yamaha R6 Forum: YZF-R6 Forums > R6 Related Discussion > Bike Build Forum

Reply
 
Thread Tools Display Modes
Old 11-25-2012, 08:17 AM   #1
easbaysav
track fiend
 
easbaysav's Avatar
 
Join Date: Oct 2012
Location: Middle of nowhere, CA
Posts: 250
Bike: 14 D675R, 09 R6
easbaysav's 09 Track Build

I haven't been around these neck of the woods for that long, but the reason I bought my 09 R6 was for track use and eventually turn her to track only. Honestly didn't care much for the paint scheme but I got a good deal on the bike and knew race glass was due to come. The black n orange grew on me quick and didn't think nothing of it until my brother (die hard SF Giants fan) complimented the colors. Bike had a dark smoke DB, flush mounts, fender eliminator, frame sliders, bar end sliders, swingarm spools, and a GYTR slip on when I got it.

After this, I had no choice but to speed up the process of my track build: http://www.r6-forum.com/forums/showp...postcount=3150

No pics from when I brought the bike home, but these are the first pics taken:

First things I did was remove the passenger pegs, did reverse shift, and unf*#$ed some wiring done to the rear turn signals.





Before picking up the bike, I sourced a steering damper and picked it up the next day. Got a HyperPro steering damper, along with some bits added from my R1 (preload adjusters, Harris gas cap, Renthal clip-ons not yet installed ATM).



Had a trackday scheduled for Laguna and didn't think I was going to make it but with some turn of events, the opportunity came back. Took the wheels and had them swapped for a new set of Q2s and had some angled valve stems installed at the same time. Already removed the GYTR and sold it to another member so I sourced a stock slip-on for the dB limits at Laguna. Also removed the peg feelers.

The donor from some of the bits above:




***I like the HyperPro steering damper cause it serves it purpose, but it's a real PITA if you have to lift the tank. Don't know how many times that thing came off since I've had the bike. Wish I could opt for the Graves kit and Ohlins damper but not for the $$$, I'll stick with having to remove and re-install.***

Last edited by easbaysav; 11-25-2012 at 09:19 AM.
easbaysav is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-25-2012, 08:31 AM   #2
easbaysav
track fiend
 
easbaysav's Avatar
 
Join Date: Oct 2012
Location: Middle of nowhere, CA
Posts: 250
Bike: 14 D675R, 09 R6
Re: easbaysav's 09 Track Build

Before the Laguna day, I had some some bits ordered and had them installed prior to my Sonoma trackday. Too bad some of them took some damage. These bits were: Woodcraft GP shift rearsets, GB Racing case covers, Puig clear DB, TechSpec C3 tank pads, Gregg's Customs mirror block offs, and a Brembo 19RCS (bought the M/C from an R1 Forum member). Was able to install the Renthal clip-ons, a Pazzo clutch lever (also from my R1), some Renthal Kevlar grips, and some Galfer SS brake lines (bought from an R6 Forum member) prior to the trackday as well.

Edit: Had my ECU reflashed by Ant @ Bauce Racing and also threw some Tygon clear hoses in there and did a rear reservoir delete when the brake lines were installed.

Here's how she looked after that trackday:








Last edited by easbaysav; 11-25-2012 at 08:49 AM.
easbaysav is offline   Reply With Quote
Old 11-25-2012, 08:35 AM   #3
easbaysav
track fiend
 
easbaysav's Avatar
 
Join Date: Oct 2012
Location: Middle of nowhere, CA
Posts: 250
Bike: 14 D675R, 09 R6
Re: easbaysav's 09 Track Build

All torn down and replaced the bent clip-on bar (LH side) and the grips also. Now awaiting some race glass and aftermarket upper fairing stay:







easbaysav is offline   Reply With Quote
Old 11-25-2012, 08:43 AM   #4
Doc-Ram
I <3 trucks
 
Doc-Ram's Avatar
 
Join Date: Apr 2008
Location: Fr3m0nt
Posts: 14,600
Bike: 08 R6, '10 SF1098
Re: easbaysav's 09 Track Build



lemme know if u want a quick shifter
Doc-Ram is offline   Reply With Quote
Old 11-25-2012, 08:51 AM   #5
easbaysav
track fiend
 
easbaysav's Avatar
 
Join Date: Oct 2012
Location: Middle of nowhere, CA
Posts: 250
Bike: 14 D675R, 09 R6
Re: easbaysav's 09 Track Build

Was deciding on Optimals or Armour Bodies. Had Armour Bodies in mind, but after hearing about the Optimals, I was curious. Found out Anthony aka Chiefsmokedawg aka Bauce Racing has the plug on both so I got in contact with him. While trying to source an aftermarket upper fairing stay, Ant recommended one and also had it in stock. So now the Armour Bodies, Dzus fasteners, MotoHolders upper stay, and some Woodcraft no-cuts were on the way. Thanks Ant!!





There's also some ETI tank sliders in the background somewhere that I bought from them directly.
easbaysav is offline   Reply With Quote
Old 11-25-2012, 08:53 AM   #6
easbaysav
track fiend
 
easbaysav's Avatar
 
Join Date: Oct 2012
Location: Middle of nowhere, CA
Posts: 250
Bike: 14 D675R, 09 R6
Re: easbaysav's 09 Track Build

MotoHolders upper fairing stay installed:

Edit: HealTech GiPro gear indicator previously installed.






Last edited by easbaysav; 11-25-2012 at 09:03 AM.
easbaysav is offline   Reply With Quote
Old 11-25-2012, 09:01 AM   #7
easbaysav
track fiend
 
easbaysav's Avatar
 
Join Date: Oct 2012
Location: Middle of nowhere, CA
Posts: 250
Bike: 14 D675R, 09 R6
Re: easbaysav's 09 Track Build

On with the Armour Bodies install. My first time doing race glass and did it myself.

Started with the tail since I figured it would be the easiest and get familiar with the process:





There's a Bauce ECU reflash and a MotyDesign 8cell QD in there.



then the upper:





and the lower:





Sticking with the OEM front fender for now and currently waiting on a ZG Corsa windscreen. The bodywork is gonna get rattle canned and more than likely be all black or might throw some orange in there also. Depends on how lazy I feeling and it will be my first time spray painting bodywork.

Headers were removed in preparation for an MJS full system.

Last edited by easbaysav; 11-25-2012 at 09:14 AM.
easbaysav is offline   Reply With Quote
Old 11-25-2012, 09:11 AM   #8
easbaysav
track fiend
 
easbaysav's Avatar
 
Join Date: Oct 2012
Location: Middle of nowhere, CA
Posts: 250
Bike: 14 D675R, 09 R6
Re: easbaysav's 09 Track Build

Some pics of the bits:



















Replaced the RH Woodcraft main bracket cause it got bent with the stock slip on:









***The pics from the MotoHolders to here were from my iPhone so sorry if they suck.***
easbaysav is offline   Reply With Quote
Old 11-25-2012, 09:15 AM   #9
easbaysav
track fiend
 
easbaysav's Avatar
 
Join Date: Oct 2012
Location: Middle of nowhere, CA
Posts: 250
Bike: 14 D675R, 09 R6
Re: easbaysav's 09 Track Build

Quote:
Originally Posted by Doc-Ram View Post


lemme know if u want a quick shifter
Thanks bro, maybe down the road.
easbaysav is offline   Reply With Quote
Old 11-25-2012, 10:43 AM   #10
GenPatton
Motorcycle Race VIP Guy
 
GenPatton's Avatar
 
Join Date: Apr 2012
Location: Albany, NY
Posts: 833
Bike: 2007 R6 Rossi Replica
Re: easbaysav's 09 Track Build

Looks awesome! Lots of sweet bits and pieces on that bike!

Hope to convert my R6 to a track bike someday.
__________________

BMC Race Filter | M4 Cat Delete | Termignoni Exhaust | Bazzaz Fuel Tuner | AGG Block-Off Plates
Fren Tubo Type 2 Lines | Integrated Tail | Rossi Replica Fairings |
OES Frame Sliders | AGG 10000K HIDs
CNC Tomok Mirrors | Lightech Quick Release Gas Cap
| GP Shift Setup | Shorty CNC Levers | Zero Gravity Screen
☼ March 2013 Ride of the Month
GenPatton is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
'11 / '06 Track Build livewoutlimit Bike Build Forum 25 05-23-2014 07:07 PM
easbaysav = excellent seller TurboBlew Buyer/Seller Feedback 0 11-02-2012 06:28 PM
'05 Track Build raulr151 Bike Build Forum 0 10-11-2011 08:04 PM
07 R6 Track Build Solracer Bike Build Forum 12 09-29-2011 07:37 AM
07' R6 Track Build The Ozzman RACE Section 21 05-17-2011 07:38 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 11:15 PM.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Motorcycle News, Videos and Reviews
Honda Grom Forum Harley Davidson Forum Honda 600RR Kawasaki Forum Yamaha R6 Forum Yamaha FZ-09 Forum
1199 Panigale Forum Roadglide Forum Honda CBR1000 Forum Vulcan Forum Yamaha R1 Forum Yamaha R3 Forum
Ducati Monster Forum Harley Forums Honda CBR250R Forum ZX10R Forum Star Raider Forum Yamaha Viking Forum
Suzuki GSXR Forum V-Rod Forums Honda Shadow Forum Kawasaki Motorcycle Forum Star Warrior Forum KTM Duke 390 Forum
SV650 Forum BMW S1000RR Forum Honda Fury Forum Kawasaki Versys Forum Drag Racing Forum Ducati 899 Panigale Forum
Suzuki V-Strom BMW K1600 Triumph Forum Victory Forums Sportbikes BMW NineT Forum
Volusia Forum BMW F800 Forum Triumph 675 Forum MV Agusta Forum HD Street Forum Suzuki GW250 Forum
Yamaha Motorcycles Victory Gunner Forum Honda Vultus Forum HD LiveWire Forum Ninja H2 Forum Ducati Scrambler Forum
R6-Forum.com is an independent Yamaha enthusiast website. Content on R6-Forum.com is generated by its users and R6-Forum.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.