I could set you up with 1 inch extra length clip on tubes to help with that as well bro.
Hmmm.. Never really considered that.. Didn't know it was a thing! Maybe if you wouldn't mind shooting me a price, for when I'm ready to deal with that!
Cause.. This is what I'm looking at, and has no more length left! Throttle side isn't quite so bad, but same idea. Guess it's not totally maxed out, but don't really feel safe having them right at the end.
I could set you up with 1 inch extra length clip on tubes to help with that as well bro.
Hmmm that sounds good
__________________ mods: woodcraft clipons and frame sliiders, leo vince slip on, 05 header mod, pcv, agg smog block offs and sbk res kit, robby moto sbk rearsets, 520 -1+2 renthal.set up, bauce racing ecu flash, ebc hh pads, and some small cosmetic stuff.
just this a random question but i just got my renthal kevlar grips in the mail and one of them seems firmer then the other, is the firmer one meant for the throttle or what?
__________________ 2006 R6 50th Anniversary
Mods:
- Shogun Front/Rear Sliders
- Shogun Bar End Sliders
- Carbon Fiber Tank Trim
- Carbon Fiber Top Trim
- Carbon Fiber Tank Pad
- Puig DB Windscreen
- Competition Werkes FE
- Graves First Generation Full Ti exhaust
- Graves EXUP Eliminator
- ASV F3 Short Levers
- Fren Tubo Stage 3 Lines with Motul RBF600
- Xentec 35w HID 6k
- BMC Race Filter
- 3rd Eye 6k LED
just this a random question but i just got my renthal kevlar grips in the mail and one of them seems firmer then the other, is the firmer one meant for the throttle or what?
Look at the diameter of the hole in them. The bigger one for the throttle side and the smaller one for the clutch side.
Look at the diameter of the hole in them. The bigger one for the throttle side and the smaller one for the clutch side.
-Jamie M.
Ahh, GOOD MAN GOOD MAN!
__________________ 2006 R6 50th Anniversary
Mods:
- Shogun Front/Rear Sliders
- Shogun Bar End Sliders
- Carbon Fiber Tank Trim
- Carbon Fiber Top Trim
- Carbon Fiber Tank Pad
- Puig DB Windscreen
- Competition Werkes FE
- Graves First Generation Full Ti exhaust
- Graves EXUP Eliminator
- ASV F3 Short Levers
- Fren Tubo Stage 3 Lines with Motul RBF600
- Xentec 35w HID 6k
- BMC Race Filter
- 3rd Eye 6k LED