easbaysav's 09 Track Build

[My94GT]

nice build so far

[easbaysav]

Thanks everybody. I hate to disappoint, but she's almost done.

What I have planned for the rest of my build:
-ETI tanks sliders - ntb installed
-MJS full system with PCV (loaded with MJS custom map) - ntb installed
-AGG smog block-off plates - on the way
-Zero Gravity Corsa windscreen - on order
-Stahlbus oil drain valve - on order

After those parts are installed and a rattle can paint job, think my build will be done...


for the time being

[My94GT]

Originally Posted by easbaysav

Thanks everybody. I hate to disappoint, but she's almost done.

What I have planned for the rest of my build:
-ETI tanks sliders - ntb installed
-MJS full system with PCV (loaded with MJS custom map) - ntb installed
-AGG smog block-off plates - on the way
-Zero Gravity Corsa windscreen - on order
-Stahlbus oil drain valve - on order

After those parts are installed and a rattle can paint job, think my build will be done...


for the time being

[easbaysav]

Originally Posted by My94GT

Lol, had to throw it in there. You know how the modding thing goes...
seems like it never stops.

[My94GT]

its always the small things that nickle and dime you

[Doc-Ram]

what...no suspension mods to the track bike? Not even getting the right springs or a rebuild with re-valving?

[easbaysav]

Originally Posted by My94GT

its always the small things that nickle and dime you

That and seeing the nice bits everybody else posts so it's like "fack, I want that."

Originally Posted by Doc-Ram

what...no suspension mods to the track bike? Not even getting the right springs or a rebuild with re-valving?

Maybe down the road. Had my suspension set up by Dave Moss at the Laguna trackday I did; plus the stock suspension should suffice my weight, 150 lbs no gear.

Suspension and performance (hp mods) were down on my list and was gonna hold off until I get better or feel I need the upgrade.

[Doc-Ram]

Originally Posted by easbaysav

Maybe down the road. Had my suspension set up by Dave Moss at the Laguna trackday I did; plus the stock suspension should suffice my weight, 150 lbs no gear.

Suspension and performance (hp mods) were down on my list and was gonna hold off until I get better or feel I need the upgrade.

I understand HP mods, but suspension can be top on the list imho.

[easbaysav]

Originally Posted by Doc-Ram

I understand HP mods, but suspension can be top on the list imho.

I'm not to that point yet, I see guys running in the faster group with stock suspension and they're doing fine.

Back when I had my third trackday, I asked Dave Moss about upgrading springs (RaceTech) for my weight and he said it wasn't necessary. For my weight and skill, he said the stock suspension is good; just needed to change the fork oil because of the amount of miles I had on the bike. That was with my 06 R1 though.

[easbaysav]

Got the MJS exhaust, AGG smog plates, and PCV installed.

The clamp for the canister was a PITA to get in because of the hardware set up and I managed to add some more scratches to my already scratched up swingarm so I covered that up with the Power Commander sticker. The DynoJet sticker for another scratch and the AGG sticker to represent.






Had some pics of the smog plates during the install, but accidentally deleted those pics. No way I'm taking it back apart for some pics. lol. But here's a side shot: