It goes on the outside of the frame once you flip it.
Yea, I've seen where you run it outside the frame. The How-To I seen has you making a couple bends in the rod. I might try it when I'm not planning to ride for a bit. I don't want to break the rod with riding days coming up!
What y'all talking about bending the rod and moving it outside the frame? On the 3rd gen you just flip the link.. This pics shows how mine was gp shifted.
__________________ mods: woodcraft clipons and frame sliiders, leo vince slip on, 05 header mod, pcv, agg smog block offs and sbk res kit, robby moto sbk rearsets, 520 -1+2 renthal.set up, bauce racing ecu flash, ebc hh pads, and some small cosmetic stuff.
Here you go bro,
OE shift rod bent to go outside the frame, make sure the bend closest to the peg is far enough back that it doesn't hit the frame when shifting(bought a spare off ebay for $10 in case I ever sell it or want to go back):
Flip this arm up and pointing out and the shift rod will connect about where my finger is pointing (vola, free GP shift on 1st gen) :