Ohlins PRXL46 YA-606 Riders 170-180-190 LBS. : Yamaha R6 : R6 Forum

silversleeper · 11-30-2012, 04:37 PM

Can someone please help me figure out which Spring I should have on my 2007 R6 (V) Ohlins PRXL46 YA-606
Riders that weigh: 170-180-190 LBS what spring do you have on your Ohlins YA-606 rear shock?

I weigh 175lbs about 183 lbs with gear.

the spring I have on it now is 01093-31/95

01093 Refers to the diameter and length of the spring
31 is the Spring Rate
95 is NM, or Kg or LB

My question is: what weight of the rider is this spring rated for? 180-190-200 lbs or none of these.

also do you also have your SAG numbers?
I got 558mm fully extended topped out, bike on the ground without rider 557mm and 555mm with rider on the bike
Free Sag I want 5-10mm and ride height I want 30-40mm and based on the spring on my bike no way to get there
with the numbers above currently Free SAG 15mm and Ride Height 3mm Pre-load is all backed out (No Preload)

Doc-Ram · 11-30-2012, 04:45 PM

would be easier to call catalyst reaction in san mateo.

silversleeper · 11-30-2012, 04:58 PM

who? Dave Moss?

Quote:

Originally Posted by Doc-Ram

would be easier to call catalyst reaction in san mateo.

Doc-Ram · 11-30-2012, 04:59 PM

Quote:

Originally Posted by silversleeper

who? Dave Moss?

Si senor

mgossel · 11-30-2012, 05:15 PM

The .95 is for a 180-190 lb rider if I not mistaken. I have the Ohlins .90 which is set for a 175lb rider. I called 35 Motorsports on mine and he was more than willing to help me out.

mgossel · 11-30-2012, 05:17 PM

I believe racetech.com has a spring calculator on their site that may be able to help you out.

silversleeper · 11-30-2012, 05:18 PM

Thanks. Sounds like I have the right spring then.

Quote:

Originally Posted by mgossel

The .95 is for a 180-190 lb rider if I not mistaken. I have the Ohlins .90 which is set for a 175lb rider. I called 35 Motorsports on mine and he was more than willing to help me out.