I have a Bazzaz AFM so I'll run it as is until I get the chance to fine tune on track. Unfortunately that won't be until early spring when I have it all put back together for next years race season!
Nice! The AFM will make some sweet maps, with the now unrestricted throttle
Nice! The AFM will make some sweet maps, with the now unrestricted throttle
-Jamie M.
I hope so! Very excited to see/feel the results. One more question.....I've only adjusted the map for "Gear 1". I'm assuming I have to go in and change it for all gears? I've fiddled with it and aside from going in and manually adjusting every gear, is there an easier way to do it? (couldn't figure out the link method).
I hope so! Very excited to see/feel the results. One more question.....I've only adjusted the map for "Gear 1". I'm assuming I have to go in and change it for all gears? I've fiddled with it and aside from going in and manually adjusting every gear, is there an easier way to do it? (couldn't figure out the link method).
You can copy and paste but you have to be VERY careful, lots of bugs with copy and paste!
If you didn't have the gears "linked" prior to making the changes you did, the only solution is copy and paste.
After you paste the map into the new gear, highlight the entire map and hit + on your keyboard. Then hit - on your keyboard, and manually bump up your 99's back up to 100.
If you do that every time you copy and paste, everything seems to work peachy.
-Jamie M.
__________________
Last edited by toysareforboys; 11-29-2012 at 12:56 PM.
I want to tell everyone in this forum that Jamie is a asset to this forum and will go out of the way for his customer!!!! I was the guy that shipped the ecu from Florida and due to hurricane sandy it took a very long time to get to him but it got there. Had a lil issue with my bike and I messaged him and let me say "Great customer service!!" He made it right and made sure I was totally satisfied! I can't thank him enough for all the aggervation with mailing and a little issue but he hooked me up BIG TIME... Anyone looking to get their ecu flashed, Jamie is the freakin MAN!! He is a Asset..! Thanks again Jamie and have a great holiday brother!!!!!
Last edited by Bluewater4Life; 11-30-2012 at 05:25 PM.
Reason: Wrong
Oh my bike rips in every damn gear!! Unbelievable notice in speed..
Thanks man!!! Glad you like it
After all the shipping issues we had I was going to post up that I wasn't going to accept any more ECU's from the USA!!! I thought for sure they had lost your original ECU in hurricane Sandy, and after UPS said the "plane was late" for your replacement ECU I was freaking out big time!
Glad you got er in time for the weekend so you can really test it out. Hopefully nice weather down there!
I flashed an 08 R1 with it today, for the idle I used 20, 0.7, 0.7, 0, 0, 0, 0
Linear Mode
