Flash Tune Interface - Review - FAQ - Page 124 : Yamaha R6 : R6 Forum

» Insurance
» Sponsors
» Yamaha YZF R6 Prices
Go Back   Yamaha R6 Forum: YZF-R6 Forums > R6 Related Discussion > Exhaust and fuel delivery

Reply
 
Thread Tools Display Modes
Old 11-30-2012, 07:58 PM   #1231
Tropicoz
I eat my R6
 
Tropicoz's Avatar
 
Join Date: Oct 2012
Posts: 196
Re: Flash Tune Interface - Review - FAQ

Well, I've tried the copy and paste method and it works 99% correctly. All the map values paste except for the last column. They remain unchanged . Not a huge issue...it's a lot easier to change a few values in a single column as opposed to rewriting the values for each gear!
I tried to start from the beginning and link the gears before making any changes and a box pops up with this message:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.OverflowException: Arithmetic operation resulted in an overflow.
at Flash_Tune.MainUI.DataGrid_CellvalueChanged()
at Flash_Tune.MainUI.changeselected(Int32 stepint, Int32 soften)
at Flash_Tune.MainUI.datagrid_KeyPress(Object sender, KeyPressEventArgs e)
at System.Windows.Forms.DataGridView.OnKeyPress(KeyPr essEventArgs e)
at System.Windows.Forms.Control.ProcessKeyEventArgs(M essage& m)
at System.Windows.Forms.DataGridView.ProcessKeyEventA rgs(Message& m)
at System.Windows.Forms.Control.WmKeyChar(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.DataGridView.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4234 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
Flash-Tune
Assembly Version: 1.2.2.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Strop/AppData/Local/Apps/2.0/816N3TQE.27E/M3N1ZR3H.3X9/flas..tion_0000000000000000_0001.0005_d0a8be3caead 40c9/Flash-Tune.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4234 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4228 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4230 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_64/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

I have no idea what it's trying to tell me. I'm guessing it's instructions to change some file and it might solve the problem?? Greek to me.

Anyway, I did notice a wierd thing happen with the values when I saved the files. After I opened them again, the values had changed slightly. For instance the 32's may have changed to 31.9's and some of the 100 values changed to 101 or 102. For the most part, the values were changed by only tenths so it isn't a big deal, but the high 102 values has me scratching my head. Should this be a concern?
__________________
Tropicoz is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 12-01-2012, 04:47 AM   #1232
OhioYJ
I eat my R6
 
OhioYJ's Avatar
 
Join Date: Jun 2009
Posts: 2,703
Re: Flash Tune Interface - Review - FAQ

Look at those maps carefully, usually when it copies everything except the last column one of two things has happened, either that table has am extra column for some reason, or it pasted everything over to the left one space.

Sometimes selecting the whole map before pasting will make it paste correctly, but a lot of the time I have to restart the software to make it work after it starts acting up.

I've always found the link all changes between gears is also very buggy and only works once in some instances, meaning I don't use it until I'm completely done with the map.
__________________
07 R6, MJS Header, GYTR slip on, smog block offs, K&N, flashed ECU, PCV, AutoTune, -1/+2.
OhioYJ is offline   Reply With Quote
Old 12-01-2012, 04:53 AM   #1233
OhioYJ
I eat my R6
 
OhioYJ's Avatar
 
Join Date: Jun 2009
Posts: 2,703
Re: Flash Tune Interface - Review - FAQ

Also you aren't mixing maps between versions of software are you?

You may want to start a map from scratch as it sounds like something in your current map is corrupt.
__________________
07 R6, MJS Header, GYTR slip on, smog block offs, K&N, flashed ECU, PCV, AutoTune, -1/+2.
OhioYJ is offline   Reply With Quote
Old 12-01-2012, 06:13 AM   #1234
Tropicoz
I eat my R6
 
Tropicoz's Avatar
 
Join Date: Oct 2012
Posts: 196
Re: Flash Tune Interface - Review - FAQ

I'll look into it further. I do notice some CRAZY values when I switch views from percentage to values. When I get home I'll post up a picture to get a consensus. Is 103% throttle opening a bad thing? LOL, that makes me 3% faster than the next guy!!!!
__________________
Tropicoz is offline   Reply With Quote
Old 12-01-2012, 10:07 AM   #1235
Tropicoz
I eat my R6
 
Tropicoz's Avatar
 
Join Date: Oct 2012
Posts: 196
Re: Flash Tune Interface - Review - FAQ

OK, so repetition was the key to get all the percentage values identical across all gear maps, as well as keeping "100" as the max value (none of this 101, 102, or 103 garbage). All gear maps are playing well together, but I still get some whacky values when I switch from the "percent" map to the "values" map.
Below is the Gear 1 map. FWIW, I'm adjusting everything in the Percentage map. Don't know if that makes a difference?
Attached Thumbnails
Click image for larger version

Name:	%map.jpg
Views:	21
Size:	368.8 KB
ID:	87014  
__________________
Tropicoz is offline   Reply With Quote
Old 12-01-2012, 10:43 AM   #1236
toysareforboys
Two Bro's=ORGASM *nohomo*
 
toysareforboys's Avatar
 
Join Date: Mar 2009
Location: Whitby, Ontario, Kanada
Posts: 3,236
Bike: 07 R1
Re: Flash Tune Interface - Review - FAQ

Quote:
Originally Posted by Tropicoz View Post
Below is the Gear 1 map.
Ycct/throttle maps are value maps, not percentage maps!



In the flash tune software, "percentage" means "percent difference from stock", NOT things like "percent of throttle", etc.

-Jamie M.
__________________
toysareforboys is offline   Reply With Quote
Old 12-01-2012, 01:04 PM   #1237
Tropicoz
I eat my R6
 
Tropicoz's Avatar
 
Join Date: Oct 2012
Posts: 196
Re: Flash Tune Interface - Review - FAQ

Quote:
Originally Posted by toysareforboys View Post
Ycct/throttle maps are value maps, not percentage maps!
Ah, OK.


Quote:
Originally Posted by toysareforboys View Post
In the flash tune software, "percentage" means "percent difference from stock", NOT things like "percent of throttle", etc.

-Jamie M.
Makes sense. But what doesn't make sense, is the math when comparing values between maps. For instance, in a "stock" map column 4 @2000PRM we have "3.6" when viewed as a "value", and "0" when viewed as "percent". Makes sense, stock map = no percentage change. However when we compare the same cell in a 91Pumpgas map, we have "3.7" when viewed as a "value", and "550" when viewed as "percent". To me, that means there's a 550% change..... Makes no sense at all.
Am I overcomplicating this? I hate doing things when I don't fully understand the whole process or see the relation between components. Am I to just modify the maps by the way they look, and accept that everything is going to work properly?
__________________
Tropicoz is offline   Reply With Quote
Old 12-01-2012, 03:47 PM   #1238
toysareforboys
Two Bro's=ORGASM *nohomo*
 
toysareforboys's Avatar
 
Join Date: Mar 2009
Location: Whitby, Ontario, Kanada
Posts: 3,236
Bike: 07 R1
Re: Flash Tune Interface - Review - FAQ

Quote:
Originally Posted by Tropicoz View Post
Ah, OK.
Some maps are not meant to be viewed in percent mode (the throttle map being one), where some maps can be viewed and edited both in percent mode AND value mode (the ignition timing maps for instance).

-Jamie M.
__________________
toysareforboys is offline   Reply With Quote
Old 12-01-2012, 06:22 PM   #1239
Tropicoz
I eat my R6
 
Tropicoz's Avatar
 
Join Date: Oct 2012
Posts: 196
Re: Flash Tune Interface - Review - FAQ

You sir, are a messiah of sorts!!!!!
__________________
Tropicoz is offline   Reply With Quote
Old 12-03-2012, 06:00 AM   #1240
cbrkp
I eat my R6
 
Join Date: Aug 2006
Location: Ontario, Canada
Posts: 112
Bike: 07 Cbr 600RR & 06 R6
Re: Flash Tune Interface - Review - FAQ

hey guys. so I'm going to grab a quick shift setup either from annitori or just a sensor and run if off pin #21 (where is pin 21 btw and what color is it on the ecu plugs)?

was wondering if I enable quickshift sensor on flash tune how does it cut the bike off, ignition or fuel?

to recap once i flash the ecu engine brakig is automatically reduced by 20%?

anybody have a throttle map for me to only release openings dont need quick turn throttle? just flashed my ecu and the bike finally runs, stupid effed up immobilizer

what is: AIS , TOS and ETV?

when im changing values in ycct how come colors dont change only values? i figured a value at 100 would be red but it is not

cheers!
__________________
If you're not falling you're not trying hard enough

Last edited by cbrkp; 12-03-2012 at 02:40 PM.
cbrkp is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone use ecu from flash-tune? ilian74 Exhaust and fuel delivery 118 05-28-2013 11:39 AM
micron slip on no tune vs. full ti leo with tune daisbest Exhaust and fuel delivery 2 09-06-2010 06:32 AM
Vega V-Tune Bluetooth Helmet Review Captscooter 954 R6 Product Reviews 3 08-25-2010 06:02 PM
YEC Race ECU, Wire Harness, Cable Interface and software sonysnakeman Bikes Parts For Sale 2 11-27-2008 05:24 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 03:17 PM.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Motorcycle News, Videos and Reviews
Honda Grom Forum Harley Davidson Forum Honda 600RR Kawasaki Forum Yamaha R6 Forum Yamaha FZ-09 Forum
1199 Panigale Forum Roadglide Forum Honda CBR1000 Forum Vulcan Forum Yamaha R1 Forum Yamaha R3 Forum
Ducati Monster Forum Harley Forums Honda CBR250R Forum ZX10R Forum Star Raider Forum Yamaha Viking Forum
Suzuki GSXR Forum V-Rod Forums Honda Shadow Forum Kawasaki Motorcycle Forum Star Warrior Forum KTM Duke 390 Forum
SV650 Forum BMW S1000RR Forum Honda Fury Forum Kawasaki Versys Forum Drag Racing Forum Ducati 899 Panigale Forum
Suzuki V-Strom BMW K1600 Triumph Forum Victory Forums Sportbikes BMW NineT Forum
Volusia Forum BMW F800 Forum Triumph 675 Forum MV Agusta Forum HD Street Forum Suzuki GW250 Forum
Yamaha Motorcycles Victory Gunner Forum Honda Vultus Forum