yes its a awesome slip on exchaust and like i said in my opinion the best osundign one ive heard so far.... it has a low growl/ rumble to it instead of high pitched tone.
Do a GOLD rim stripe.... that would look titties..... even tho you dont have any gold on there i think it would look badass...
light socket from 2003 R1
[IMG][/IMG]
I used a 1/2" diameter socket (o.d.) and heated it up with a torch, melted a hole in the plastic, then cleaned it up with a debur knife.
[IMG][/IMG]
__________________
99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
__________________
99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
another thing im doing is debating about selling the greggs flush mounts and going back to stalk type LED signals in front and rear and just not use the integrated signals in the tail.... my mind is full of ideas lol
__________________
99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
You can still see it, the corner is somewhat separated, it works pretty good, but ya i would like to try out the led 194 bulbs.
__________________
99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
I think i ordered them from cheapcycleparts.com part #5PW-84312-00-00 $9.18 a piece. Pretty cool mod, even if you just used them as running lights it looks cool, cheap and easy to do.
__________________
99 r6 ~ Factory Pro Jet kit with slight changes, OEM filter, TSR Frame Sliders, Dan-Moto Carbon Fiber GP exhaust, Renthal grips, JPR levers, pro tek bar ends, motion pro cables, Michelin Power 2ct tires, RK 520 conversion -1/stock rear, headlight signal conversion using 2003 r1 sockets, Luckybike.com flushmounts used as running lights, Puig double bubble windscreen
[/IMG]
[/IMG]
[/IMG]
Linear Mode
