How-to: Install UniqueMotoLights Mini H1 Projector kit into 2006 - 2012 R6 headlights

[emg530]

theyre def bright but the beam pattern sucks its the issue with the halo hitting the headlight and cant be adjusted properly. causes the beam to only be projected like 10ft infront which greatly decreases visibility and defets the purpose of gettin projectors. just seeing if everyone with the 06-07 is dealing with this and dont care or am i the only one thats bothered by it

[borka]

Originally Posted by emg530

theyre def bright but the beam pattern sucks its the issue with the halo hitting the headlight and cant be adjusted properly. causes the beam to only be projected like 10ft infront which greatly decreases visibility and defets the purpose of gettin projectors. just seeing if everyone with the 06-07 is dealing with this and dont care or am i the only one thats bothered by it

the 06/07 headlights are smaller than 08+, so its tough to have these projectors adjusted properly. But you can adjust the left headlight high enough so its not pointing down and points forward. you basically need to bring all 3 adjusters on the left headlight all the way back, so remove the rear dust cap, and adjust the 3 screws on the back of the left headlight all the way clockwise. be very careful not to strip them, so if you feel more resistance, then its all they way in.

Right now for 06/07 bikes i have a new projector model, which looks the same as the Mini H1, but is not as deep, and it fits better in 06/07 headlights, and allows full adjust-ability.

in 08+ bikes this is not an issue, since the headlights are deeper.

[emg530]

iv already made that adjustment when i got the lights back from you the second time. do you have pics of the new projectors with an output shot? if those are just as good as these i may have you put those in because i cant stand not having a proper pattern and its the only thing i dislike about the lights, everything else is perfect

[motoman21]

Just ordered a kit from you guys. I read the install thread and thought, hey I can do this.

[motoman21]

Any how-to's on the led strip install? Dont want any wires showing.

[borka]

Originally Posted by motoman21

Just ordered a kit from you guys. I read the install thread and thought, hey I can do this.

Thank you for your order.

Originally Posted by motoman21

Any how-to's on the led strip install? Dont want any wires showing.

You simply glue the LED strips like this:


The wires wont be visible, you just tuck them behind the reflectors, on the outer top corner.

[borka]

Originally Posted by emg530

iv already made that adjustment when i got the lights back from you the second time. do you have pics of the new projectors with an output shot? if those are just as good as these i may have you put those in because i cant stand not having a proper pattern and its the only thing i dislike about the lights, everything else is perfect

Here are the new projectors for the 06/07 R6 bikes, they solve the clearance issue and you will have plenty of room to adjust these properly.
They look the same as our Mini H1's but are not as deep.

Here they are installed:


Here is a quick output shot, this is just one projector!
Its super bright, with a clean cut off line, it turns night into day.
take note of the far away tree line

[motoman21]

Cool thanks

[Lojack]

u can do it man! buddy of my just finished projector install and it looks good. BUT WE CANT PUT THE ****IN BIKE BACK TOGETHER... no joke man, them fairings are a bitch

[Glock21sf_Saiga12]

Originally Posted by Lojack

u can do it man! buddy of my just finished projector install and it looks good. BUT WE CANT PUT THE ****IN BIKE BACK TOGETHER... no joke man, them fairings are a bitch

haha.. yeah the factory puts on a lot of "extra" bolts/fasteners that are left over when done