|
Re: motodynamics/ FE install on my 11' Raven
Quote:
Originally Posted by honda4life05
nice bike! are the protons fairly visible from the front even in daylight? I feel like I may get stopped for my motodynamics rear signals let alone if i get flushmounts up front, that is why I am hesitant lol
|
Thanks, yeah the protons are VERY visible from the front. I did a lot of research before I bought them. The other thing I like is that they are a running light (stay on once the bike is on) as well, just like the stock ones, so you get a bit of constant visibility as well. You can select different modes of flashing when you install them as well. I think they are brighter, or at least more noticable than the stock ones, and they look so much better. They are more expensive than a set from ebay or soemthing, but you get what you pay for and these are a high quality turn signal. If you do a search throughout the forums you'll see a lot of discussion about them.
They are very easy to install (unlike the tail light.....lol). It took me about 2 beer to do the whole thing and that was taking my time (got them for Christmas and istalled them a couple days later). There is a great "how-to" in the forums here. The worst part is pulling off the plastics.
Your bike is looking sweet BTW. I think the tail light and the turn signals are the biggest changes to these bikes for looks you can do. The protons are great looking and work very well, providing high visibility. Good luck.
__________________
"If it's stupid but it works, it isn't stupid."
“Out of every one hundred men in battle, ten shouldn't even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them, for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back.” ― Heraclitus
Last edited by Pipelinz; 01-07-2013 at 10:14 AM.
|
Linear Mode
