Yamaha R6 Forum: YZF-R6 Forums banner

05 r6 Stunter rebuild!!!

11K views 58 replies 12 participants last post by  Chiragagarwal 
#1 · (Edited)
So I've put my bike through complete hell the past couple years after shows, comps, practice the list can go on lol A few months ago before the season was over I ended up riding my bike over to a scrap metal company and weighed my bike. Full fluid and 2 gallons of gas it was sitting at 448 pounds!!!! Decided this winter build I'm going to try and shave around 50 pounds off this beast, and make it just a better all around bike. here she is



List of mods and parts soon to be.....
Half tubular chromoly frame(make bike more rigid, less flex is better!)
05 race tail/08 r6r front race plastics
8 cell battery
aftermarket wheels with ceramic bearings
titanium full exhaust
smaller front sprocket and smaller rear
vortex adjustable rearsets
all new GALFER Lines, rotors, and pads
new fresh 08 r6r forks redone by RACETECH
just got my new cage from ATOWNCUSTOMS.COM(for all your stunt part needs) lolol
paint and bondo from recent paint jobs on tank will be set all the way back to the metal to get rid of the weight of the 6 layers of paint!
race harness
ignition removal
power commander
maybe a few titanium parts here and there lol

engine will be getting,
head decked
adjustable cam sprockets
port and polish
maybe 2mm over to 636 :)
all ceramic internal bearings
ignition advancer

might be missing more but I will be posting review pics on here as much as I can. INDYRPM.COM will be doing a rebuild review on thier site as well as mine when it finishes getting set up(SOON!!!)! I'll keep you all posted!!!!!:YEA
 
See less See more
2
  • Like
Reactions: Superbike life
#30 ·
before the motor in



waiting on my samco hoses!! just picked them up as a sponsor for 2013!!! Almost done!!!

and I LOVE reverse shift
 
#34 ·
I hate you!!!!!! I hate you so much!!!!!!!










:p
 
#35 ·
you sir have motivated me be to get back on 1 lol hell of a build!!
 
#37 · (Edited)
picked up a hook up from samco!!!

lightened the axles. Had them bored out for around 25 bucks. Lowered the weight by a THIRD!!!

chromoly cage AND NEW C4 ALUMINUM UPPER STAY!!!!!





 
#38 ·
P.I.M.P.ing!!!!!

Ridick - skeet skeet skeet
 
#39 · (Edited)
Finally got the bike home from my cnc guy!!!! now garage time!
better pic of the new "cage" made of chromoly....almost 5 pounds with hardware.....

 
#40 ·
Crazy ass lip service on that tank.

Ridick - skeet skeet skeet
 
#41 ·
radiator tabs braced

before I did the rad, I put the header on. if you guys never done this "trick" before it helps becuase exhaust gaskets are a pain in the dick. take a lil grease on each side and mount it into the head. they wont move, the grease will melt out

Low to mid range velocity stacks

these hoses are amazing. Thansk Samco!!!
 
#42 ·
Mounted the fairings with this baby Thanks to dave cutler from c4 revolutions! weighs 3 pounds!!!



These hotbodies racing bodywork are straight garbage. i have so much bodywork to do with these becuase of there trash quality. There was 3 cracks in the plastics from when they shipped them to me.....never again!!!
Windscreen will be trimmed down a little bit but not much

 
#43 ·
Sexy!!!!! Whoolie it already!!!

Ridick - skeet skeet skeet
 
#45 ·
#48 ·
BOTM candidate!!!!!!!!!!!!!!!
 
#52 ·
Dope!!!!
 
#54 ·
Finally!!!!!!!!!!!!!!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top