Yamaha R6 Forum: YZF-R6 Forums banner

06 R6 part out

4K views 58 replies 21 participants last post by  CTGlass 
#1 · (Edited)
rear sets $50
front forks with axle, modded top triple, lower triple, brake lines$250
clip ons $60
complete subframe sold
throttle bodies $75
air box $40
rear wheel with axle, sprocket/carrier, and rear rotor, w/o tire sold
brembo stock front master cylinder $50
complete rear brake system(still sealed with reservoir, mc, and caliper/pads) $55
swingarm with pivot, seals, bearings, adjusters, etc. $70
Trottle assembly with cables, housing, throttle tube $30
stock clutch cable $15
fuel pump $30
regulator/rectifier $30
gauges w/ about 10.5k mi. $90
front seat $30
ECU sold
radiator w/ fans sold
engine w/ about 10.5k miles and vortex right timing cover MAKE AN OFFER -will accept low offer, want to get rid of it. will come with bill of sale. ran great just before parting out the bike
freestyle ingenuity cage minus some hardware-used $90
ALL PARTS ARE OBO, don't be shy mates
this bike was never stunted, was being set up to, but never got to it.
make an offer on the engine(local pickup or you arrange shipping, i'll work with ya on this),
or MAKE ME AN OFFER for individual parts if you think it's too high, though i do try to be at least fair on prices.
i have more pics ill be posting as well.

prices posted include shipping to the lower 48 ;) it's easier that way.
 

Attachments

See less See more
15
#17 ·
are the rearsets stock or aftermarket?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top