Yamaha R6 Forum: YZF-R6 Forums banner

Agg Racing smog block offs - $22.95 shipped

113K views 1K replies 208 participants last post by  Derek Polkamp 
#1 · (Edited)
edit: they're $22.95 shipped, and they will come with a cap for your airbox as well as a ziptie to insure the cap is secure on the airbox plug, or to be used to keep the power harness out of the way of the fans once the pump is removed.

alright... i'm now producing my own block off plates b/c i knew even at $35 shipped, it was a bit too much, and $45 was FOR SURE too much. they'll fit these bike: R1 (2004-13), R6 (2003-13), R6S (2006-13), FZ1 (all), FZ6 (all), Kawasaki ZX6RR (2003-08) ZX10R, ZX12 (2004-08) ZX14R (all). if you're bike's not on the list, they probably won't fit your bike, but ask me anyways, and i'll do a little design research and find out.

they're CNC machined at a shop around the corner from me, and i will usually get orders of 23 sets at a time (just the number that they can get out of a single order of aluminum. if i'm out, and you order, it may be a few days before i can get to the shop to place the order, so please have patience - i'm just a regular guy trying to help other guys get good parts at good prices. :fact

to install these, you just take off your old ones - there are plenty of "how to's" on this board as well as others to help you get the AIS pump and hoses off (jason D did a pretty good one... might wanna PM him about it). save the stock bolts, and remove all the crap from the stock gaskets (flaps, grates, screws, etc). put the gaskets back on, and then bolt these plates onto the top of the motor. voila... you're done.

so just follow the link below and change the quantity to however many you want (1 is ONE SET, so TWO plates).



...and here is one of just the gasket before they're installed:




there are only pro's to doing this mod... and zero con's:

  • decreases decel popping
  • gives you the ability to more accurately tune your bike (whether with auto tune or on a dyno)
  • decreased weight
  • everybody's doing it :hehe

use the link below - be sure to specify whether it's domestic or international shipping. thanks y'all!

http://aggracing.com/store/index.php?route=product/product&product_id=51

bluerebel (on this forum) did a GREAT how-to write up on the installation of these plates. his thread can be found HERE.
 
See less See more
2
#6 ·
Re: Agg Racing smog block offs - $26 shipped

Oh yeah just in time for spring AGG and in on smog block offs. Thank you for helping us out.
 
#7 ·
Re: Agg Racing smog block offs - $26 shipped

bump... all orders that were made today, will be dropped off at the PO in a bit. you should already have tracking numbers from paypal - if you haven't received it yet, you will. :fact

only 8 sets left in this batch. :sing
 
#12 ·
Re: Agg Racing smog block offs - $26 shipped

when will the next batch be ready? i just added money to paypal so it won't clear for a few days
:stupic

You gonna make another batch?
it takes the shop 3-4 days from when i order them to pick em up... so once i get down to 1 set, i'll order another batch. they're pretty good to me. :fact but don't feel like you have to wait... i still have 5 sets (a couple local guys didn't show up at the track to get em, so i'm counting those again). i'll prolly end up ordering another round before the end of the week. no biggie either way really.
 
#14 ·
Re: Agg Racing smog block offs - $26 shipped

I was going out to check the mail and to see if I should ride, 51 here, and look what I found in the mailbox. :sing :toocool:


iirc from your old chain sprocket thread group buy Agg the speedo drd would be good when I get the chain and sprockets for my 520 conversion...:secret
 
#22 ·
Re: Agg Racing smog block offs - $26 shipped

also, i just added a "get a $9 r6 forum hat with purchase" button... so if y'all want BOTH, this is the way to do it.

just know, they'll ship together once the hats arrive about the middle of next week. thanks y'all!
 
#25 ·
Re: Agg Racing smog block offs - $26 shipped

Payment sent from brprs@yahoo.com for smog block offs
got it... thanks man! i'll ship em out on wednesday/thursday when the new batch is ready - go cleaned out on saturday morning.

hey agg,

just got them in the mail yesterday! thanks again!
good luck... get the allen wrench sockets - it'll make your job A TON easier. :)
 
#29 ·
Re: Agg Racing smog block offs - $26 shipped

no problem. they weren't THAT hard to install, huh?? :)
No...but I had a guy that knew what he was doing help me out. I wouldn't say it was HARD just more of a BITCH. :*tongue
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top