Yamaha R6 Forum: YZF-R6 Forums banner

Question for engine gurus

578 views 2 replies 2 participants last post by  Fubba 
#1 ·
A couple of pieces of my clutch cover broke when I pulled it off and fell right on the lip of the oil pan. I got most off but maybe two small shavings fell down in it. Should I drop the oil pan to do something with these? Or just let it be? Also, if I do drop it, do I need to change the header gasket in the process? It's got aftermarket headers on it. Or will the gasket be ok?
 
#2 ·
Ok well first off you can re-use the gaskets no problem.

Second I would change oil and filter if I was you.

Would not drop the pan just for "maybe" two small shavings but hey thats me.

I'm sure some people on here would arguee.

I have a Scotts oil filter on my bike and if you seen the magnet after 600 miles you would throw up....lol Lots of metal gets stuck on there.

Hey thats just my .02
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top