Yamaha R6 Forum: YZF-R6 Forums banner

Speed Bleeders!

2K views 8 replies 4 participants last post by  m3lover1 
#1 ·
Hey everyone, its time to change fluid and bleed those brakes again. I know some of you track junkies are doing fluid changes on the regular, so hopefully someone can shed some light on this for me.

I want to switch to a speed bleeder set up, but it seems that there is a lack of information out there as to which size will fit the 06+ R6's.

http://speedbleeder.com/Motorcycle Sizes.htm

as you can see, they only have up to 2005.

discussed a bit here but never confirmed
http://www.r6-forum.com/forums/showthread.php?t=60072

i believe the front would be the SB8125L, but am at a loss for what the rear brake would be.

I want to order these ASAP, so any confirmed fittings would be greatly appreciated.

I have done my fair share of searching, and cant seem to come up with the answer. :bow
 
See less See more
#2 ·
You're gonna get talked out of getting it, just like I was when I asked about them...
:lmao
 
#7 ·
well you were right lol. I was about to checkout on some bleeders, but i checked the local harbor freight and got a mityvac for 32 bucks instead. harbor freight and coupons FTW
 
#6 ·
#5 ·
seen those threads about how its easy enough without them and such, but just saving the time each time doing it is enough to justify the 20 dollar cost for 3 bleeder screws.

If i can save some time, then its well worth it for me.
 
#9 ·
^^ told you!! He was the one that also talked me out of it too!! :lmao
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top